College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China.
School of Mechanical Engineering, Anhui University of Technology, Maanshan 243032, China.
Sensors (Basel). 2021 Sep 15;21(18):6197. doi: 10.3390/s21186197.
This study is mainly about the designation of a new type of haptic device and an asymmetric teleoperation robot system. Aiming at the problems of tracking and transparency of an asymmetric teleoperation system, a robust control algorithm based on a state observer was proposed. The Haptic Device was designed and was chosen as the master-robot of the system. The Baxter dual-arm robot was chosen as the slave-robot of the system. The simulation experiment of robust control based on a state observer of the asymmetric teleoperation robot was carried out. The experiment results showed that the maximum values of displacement tracking errors in three directions x, y, and z are 0.02 m, 0.01 m, and 0.015 m, respectively. Compared with single- joint PID control, the performance of the new control algorithm is improved. The force feedback experiment on the real asymmetric teleoperation robot system was carried out. The results showed that the force feedback wave is consistent with the actual situation and showed that the robust control algorithm proposed is superior to PID. Therefore, the algorithm perfectly satisfied the system. The experiment parameters also demonstrate that the haptic device satisfies the design requirements of the asymmetric teleoperation robots system and the industry standards.
本研究主要涉及一种新型触觉装置和非对称遥操作机器人系统的设计。针对非对称遥操作系统的跟踪和透明性问题,提出了一种基于状态观测器的鲁棒控制算法。设计了触觉装置,并将其选为系统的主机器人。选择 Baxter 双臂机器人作为系统的从机器人。对基于状态观测器的非对称遥操作机器人的鲁棒控制进行了仿真实验。实验结果表明,三个方向 x、y 和 z 的位移跟踪误差的最大值分别为 0.02m、0.01m 和 0.015m。与单关节 PID 控制相比,新控制算法的性能得到了提高。在真实的非对称遥操作系统上进行了力反馈实验。结果表明,力反馈波与实际情况一致,表明所提出的鲁棒控制算法优于 PID。因此,该算法完全满足系统要求。实验参数也表明,触觉装置满足非对称遥操作机器人系统和工业标准的设计要求。