Antúnez-Conde Raúl, Navarro Cuéllar Carlos, Salmerón Escobar José Ignacio, Díez-Montiel Alberto, Navarro Cuéllar Ignacio, Dell'Aversana Orabona Giovanni, Del Castillo Pardo de Vera José Luis, Navarro Vila Carlos, Cebrián Carretero José Luis
Maxillofacial Surgery Department, Hospital General Universitario Gregorio Marañón, 28009 Madrid, Spain.
Maxillofacial Surgery Department, Università "Federico II", 80131 Naples, Italy.
J Clin Med. 2021 Sep 30;10(19):4565. doi: 10.3390/jcm10194565.
Intraosseous venous malformations affecting the zygomatic bone are infrequent. Primary reconstruction is usually accomplished with calvarial grafts, although the use of virtual surgical planning, cutting guides and patient-specific implants (PSI) have had a major development in recent years. A retrospective study was designed and implemented in patients diagnosed with intraosseous venous malformation during 2006-2021, and a review of the scientific literature was also performed to clarify diagnostic terms. Eight patients were treated, differentiating two groups according to the technique: four patients were treated through standard surgery with resection and primary reconstruction of the defect with calvarial graft, and four patients underwent resection and primary reconstruction through virtual surgical planning (VSP), cutting guides, STL models developed with CAD-CAM technology and PSI (titanium or Polyether-ether-ketone). In the group treated with standard surgery, 75% of the patients developed sequelae or morbidity associated with this technique. The operation time ranged from 175 min to 210 min (average 188.7 min), the length of hospital ranged from 4 days to 6 days (average 4.75 days) and the postoperative CT scan showed a defect surface coverage of 79.75%. The aesthetic results were "excellent" in 25% of the patients, "good" in 50% and "poor" in 25%. In the VSP group, 25% presented sequelae associated with surgical treatment. The operation time ranged from 99 min to 143 min (average 121 min), the length of hospital stay ranged from 1 to 2 days (average of 1.75 days) and 75% of the patients reported "excellent" results. Postoperative CT scan showed 100% coverage of the defect surface in the VSP group. The multi-stage implementation of virtual surgical planning with cutting guides, STL models and patient-specific implants increases the reconstructive accuracy in the treatment of patients diagnosed with intraosseous venous malformation of the zygomatic bone, reducing sequelae, operation time and average hospital stay, providing a better cover of the defect, and improving the precision of the reconstruction and the aesthetic results compared to standard technique.
累及颧骨的骨内静脉畸形并不常见。虽然近年来虚拟手术规划、切割导板和定制植入物(PSI)有了重大发展,但原发性重建通常还是采用颅骨移植来完成。我们设计并实施了一项针对2006年至2021年间诊断为骨内静脉畸形患者的回顾性研究,还对科学文献进行了综述以明确诊断术语。共治疗了8例患者,根据技术将其分为两组:4例患者通过标准手术进行切除,并使用颅骨移植对缺损进行一期重建;另外4例患者则通过虚拟手术规划(VSP)、切割导板、利用CAD-CAM技术制作的STL模型和定制植入物(钛或聚醚醚酮)进行切除和一期重建。在接受标准手术治疗的组中,75%的患者出现了与该技术相关的后遗症或并发症。手术时间为175分钟至210分钟(平均188.7分钟),住院时间为4天至6天(平均4.75天),术后CT扫描显示缺损表面覆盖率为79.75%。25%的患者美学效果为“优秀”,50%为“良好”,25%为“差”。在VSP组中,25%的患者出现了与手术治疗相关的后遗症。手术时间为99分钟至143分钟(平均121分钟),住院时间为1至2天(平均1.75天),75%的患者报告美学效果“优秀”。术后CT扫描显示VSP组缺损表面覆盖率为100%。与标准技术相比,采用切割导板、STL模型和定制植入物的虚拟手术规划多阶段实施提高了颧骨骨内静脉畸形患者治疗中的重建准确性,减少了后遗症、手术时间和平均住院时间,更好地覆盖了缺损,提高了重建精度和美学效果。