Simple, rapid, and reproducible capillary gel electrophoresis separation and laser-induced fluorescence detection of DNA topoisomers with unmodified fused silica separation capillaries.

The topology of DNA is a critical quality attribute for plasmid-based pharmaceuticals, making quantification of trace levels of plasmid topoisomers an important analytical priority. An automated and cost-effective method based on capillary gel electrophoresis laser-induced fluorescence detection is described. The method outlined in this report is significant because it is easily implemented by any laboratory for which routine analyses of plasmid topology are critical for the development of new plasmid-based therapies as well as for quality control of gene therapies utilizing supercoiled DNA. Detection of topoisomers was achieved by incorporating ethidium bromide in the separation medium. The detector response was improved by 3 orders of magnitude by utilizing a 605-nm optical filter with a 15-nm bandwidth. Separations of linear, open circle, supercoiled, and multimer DNA plasmids ranging from 4.2 to 10.5 kbp were accomplished in under 6 min using an unmodified fused silica capillary (50-μm internal diameter). The background electrolyte was comprised of 0.5% gel, which was hydroxypropylmethyl cellulose, 1 mM ethylenediaminetetraacetic acid, and 50 mM N-(2-acetamido)-2-aminoethanesulfonic acid (pH of 6.25). The separations, which balanced the bulk electroosmotic flow, the electrophoretic mobility of the DNA, and gel sieving were dependent upon the pH of the electrolyte and the gel concentration. Reproducibility was dependent upon the procedure used to prepare the gel as well as other factors including the ethidium bromide concentration and capillary conditioning. A single unmodified capillary operated for more than 150 runs had an across-day migration time precision of 1% relative standard deviation and percent area precision of 10% relative standard deviation.