Suppr超能文献

CH + H ⇄ CH: ΔCH反应速率数据的全局主方程分析

Global Master Equation Analysis of Rate Data for the Reaction CH + H ⇄ CH: ΔCH.

作者信息

Blitz Mark A, Pilling Michael J, Robertson Struan H, Seakins Paul W, Speak Thomas H

机构信息

School of Chemistry, University of Leeds, Leeds LS2 9JT, U.K.

National Centre for Atmospheric Science (NCAS), University of Leeds, Leeds LS2 9JT, U.K.

出版信息

J Phys Chem A. 2021 Nov 4;125(43):9548-9565. doi: 10.1021/acs.jpca.1c05911. Epub 2021 Oct 27.

Abstract

While forward and reverse rate constants are frequently used to determine enthalpies of reaction and formation, this process is more difficult for pressure-dependent association/dissociation reactions, especially since the forward and reverse reactions are usually studied at very different temperatures. The problems can be overcome by using a data-fitting procedure based on a master equation model. This approach has been applied to existing experimental pressure-dependent forward and reverse rate coefficients for the reaction CH + H ⇄ CH (, ) using the MESMER code to determine ΔCH from the enthalpy of the reaction. New measurements of , were included in analysis. They are based on laser flash photolysis with direct observation of H atom time profiles by vacuum ultraviolet laser-induced fluorescence under conditions where the approach to equilibrium could be observed. Measurements were made over the temperature range 798-828 K and with [He] from 2.33 to 7.21 × 10 molecule cm. These data were then combined with a wide range of existing experimental data with helium as the bath gas (112 measurements of and , covering the temperature range 285-1094 K, and [He] = 7.1 × 10-1.9 × 10 molecule cm) and fitted using the master equation solver MESMER. The required vibrational frequencies and rotational constants of the system were obtained from calculations, and the activation threshold for association (Δ), enthalpy of reaction (Δ), imaginary frequency (υ), and helium energy-transfer parameters (⟨Δ⟩(/298)) were optimized. The resulting parameters (errors are 2σ) are Δ = 11.43 ± 0.34 kJ mol, Δ = -145.34 ± 0.60 kJ mol, υ = 730 ± 130 cm, ⟨Δ⟩ = 54.2 ± 7.6 cm, and = 1.17 ± 0.12. A value of Δ(CH) = 120.49 ± 0.57 kJ mol is obtained by combining Δ with standard enthalpies of formation for H and CH and making the appropriate temperature corrections. The dependence of these parameters on how the internal rotor and CH inversion modes are treated has been explored. The experimental data for other bath gases have been analyzed, and data sets compatible with the potential energy surface parameters determined above have been identified. The parameters are virtually identical but with slightly smaller error limits. Parameterization of , using the Troe formalization has been used to investigate competition between ethyl decomposition and reaction with oxygen under combustion conditions.

摘要

虽然正向和逆向速率常数常用于确定反应和生成的焓,但对于压力依赖的缔合/解离反应,这个过程更加困难,尤其是因为正向和逆向反应通常是在非常不同的温度下进行研究的。这些问题可以通过使用基于主方程模型的数据拟合程序来克服。这种方法已应用于反应CH + H ⇄ CH (, )现有的与压力相关的正向和逆向速率系数,使用MESMER代码从反应焓中确定ΔCH。新的, 的测量值也包含在分析中。它们基于激光闪光光解,并在可以观察到平衡过程的条件下,通过真空紫外激光诱导荧光直接观察H原子的时间分布。测量是在798 - 828 K的温度范围内,以及[He]从2.33到7.21×10分子/cm的条件下进行的。然后将这些数据与大量以氦气作为缓冲气体的现有实验数据相结合(112次, 的测量,覆盖285 - 1094 K的温度范围,以及[He] = 7.1×10 - 1.9×10分子/cm),并使用主方程求解器MESMER进行拟合。该系统所需的振动频率和转动常数通过计算获得,缔合的活化阈值(Δ)、反应焓(Δ)、虚频率(υ)以及氦气能量转移参数(⟨Δ⟩(/298))都进行了优化。得到的参数(误差为2σ)为Δ = 11.43 ± 0.34 kJ/mol,Δ = -145.34 ± 0.60 kJ/mol,υ = 730 ± 130 cm,⟨Δ⟩ = 54.2 ± 7.6 cm,以及 = 1.17 ± 0.12。通过将Δ与H和CH的标准生成焓相结合并进行适当的温度校正,得到Δ(CH) = 120.49 ± 0.57 kJ/mol的值。已经探索了这些参数对内部转子和CH反转模式处理方式的依赖性。对其他缓冲气体的实验数据进行了分析,并确定了与上述确定的势能面参数兼容的数据集。这些参数实际上是相同的,但误差范围略小。使用Troe形式对, 进行参数化已被用于研究燃烧条件下乙基分解与与氧反应之间的竞争。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验