Department of Civil and Environmental Engineering, University of Alberta, Edmonton, Alberta T6G 1H9, Canada.
Department of Renewable Resources, University of Alberta, Edmonton, Alberta T6G 2E3, Canada.
Sci Total Environ. 2022 Feb 25;809:151120. doi: 10.1016/j.scitotenv.2021.151120. Epub 2021 Oct 28.
Biochar has been widely studied as an adsorbent for the removal of contaminants from wastewater due to its unique characteristics, such as having a large surface area, well-distributed pores and high abundance of surface functional groups. Critical review of the literature was performed to understand the state of research in utilizing biochars for industrial wastewater remediation with emphasis on pollutants that co-exist in wastewater from several industrial activities, such as textile, pharmaceutical and mining industries. Such pollutants include organic (such as synthetic dyes, phenolic compounds) and inorganic contaminants (such as cadmium, lead). Multiple correspondence analyses suggest that through batch equilibrium, columns or constructed wetlands, researchers have used mechanistic modelling of isotherms, kinetics, and thermodynamics to evaluate contaminant removal in either synthetic or real industrial wastewaters. The removal of organic and inorganic contaminants in wastewater by biochar follows several mechanisms: precipitation, surface complexation, ion exchange, cation-π interaction, and electrostatic attraction. Biochar production and modifications promote good adsorption capacity for those pollutants because biochar properties stemming from production were linked to specific adsorption mechanisms, such as hydrophobic and electrostatic interactions. For instance, adsorption capacity of malachite green ranged from 30.2 to 4066.9 mg g depending on feedstock type, pyrolysis temperature, and chemical modifications. Pyrolyzing biomass at above 500 °C might improve biochar quality to target co-existing pollutants. Treating biochars with acids can also improve pollutant removal, except that the contribution of precipitation is reduced for potentially toxic elements. Studies on artificial intelligence and machine learning are still in their infancy in wastewater remediation with biochars. Meanwhile, a framework for integrating artificial intelligence and machine learning into biochar wastewater remediation systems is proposed. The reutilization and disposal of spent biochar and the contaminant release from spent biochar are important areas that need to be further studied.
生物炭由于其独特的特性,如具有较大的表面积、分布均匀的孔隙和丰富的表面官能团,已被广泛研究作为去除废水中污染物的吸附剂。本文对文献进行了批判性回顾,以了解利用生物炭修复工业废水的研究现状,重点是研究共存于纺织、制药和采矿业等多种工业活动废水的污染物。这些污染物包括有机污染物(如合成染料、酚类化合物)和无机污染物(如镉、铅)。多元对应分析表明,通过批量平衡、柱或人工湿地,研究人员已经使用等温线、动力学和热力学的机制模型来评估合成或实际工业废水中的污染物去除。生物炭通过几种机制去除废水中的有机和无机污染物:沉淀、表面络合、离子交换、阳离子-π 相互作用和静电吸引。生物炭的生产和改性促进了对这些污染物的良好吸附能力,因为生物炭的特性源于生产,与特定的吸附机制有关,如疏水性和静电相互作用。例如,孔雀石绿的吸附容量取决于原料类型、热解温度和化学改性,范围从 30.2 到 4066.9mg/g。在 500°C 以上热解生物质可能会提高生物炭的质量,以达到针对共存污染物的目标。用酸处理生物炭也可以提高污染物的去除率,但对于潜在有毒元素,沉淀的贡献会降低。在利用生物炭修复废水方面,人工智能和机器学习的研究仍处于起步阶段。同时,提出了将人工智能和机器学习纳入生物炭废水修复系统的框架。废生物炭的再利用和处置以及废生物炭中污染物的释放是需要进一步研究的重要领域。