Plant Biomechanics Group @ Botanic Garden, University of Freiburg, Freiburg, Germany.
Cluster of Excellence livMatS @ FIT - Freiburg Center for Interactive Materials and Bioinspired Technologies, University of Freiburg, Freiburg, Germany.
J Exp Bot. 2022 Feb 24;73(4):1236-1252. doi: 10.1093/jxb/erab541.
Plants are exposed to various environmental stresses. Leaves immediately respond to mechano-stimulation, such as wind and touch, by bending and twisting or acclimate over a longer time period by thigmomorphogenetic changes of mechanical and geometrical properties. We selected the peltate leaves of Pilea peperomioides for a comparative analysis of mechano-induced effects on morphology, anatomy, and biomechanics of petiole and transition zone. The plants were cultivated for 6 weeks in a phytochamber divided into four treatment groups: control (no stimulus), touch stimulus (brushing every 30 s), wind stimulus (constant air flow of 4.6 m s-1), and a combination of touch and wind stimuli. Comparing the four treatment groups, neither the petiole nor the transition zone showed significant thigmomorphogenetic acclimations. However, comparing the petiole and the transition zone, the elastic modulus (E), the torsional modulus (G), the E/G ratio, and the axial rigidity (EA) differed significantly, whereas no significant difference was found for the torsional rigidity (GK). The twist-to-bend ratios (EI/GK) of all petioles ranged between 4.33 and 5.99, and of all transition zones between 0.67 and 0.78. Based on the twist-to-bend ratios, we hypothesize that bending loads are accommodated by the petiole, while torsional loads are shared between the transition zone and petiole.
植物会暴露在各种环境压力下。叶片会立即对风、触碰等机械刺激做出反应,发生弯曲和扭转;或者通过较长时间的机械和几何特性的向触性变化来适应。我们选择了苎麻的盾状叶来对比分析机械刺激对叶柄和过渡区形态、解剖结构和生物力学的影响。将植物在植物培养室中培养 6 周,分为 4 个处理组:对照(无刺激)、触摸刺激(每 30 秒刷一次)、风刺激(4.6 m s-1 的恒定气流)和触摸与风刺激的组合。比较这四个处理组,无论是叶柄还是过渡区都没有明显的向触性适应。然而,比较叶柄和过渡区,弹性模量 (E)、扭转模量 (G)、E/G 比和轴向刚性 (EA) 有显著差异,而扭转刚性 (GK) 没有显著差异。所有叶柄的扭转弯曲比(EI/GK)在 4.33 到 5.99 之间,所有过渡区的扭转弯曲比在 0.67 到 0.78 之间。基于扭转弯曲比,我们假设弯曲载荷由叶柄来承受,而扭转载荷则由过渡区和叶柄共同分担。