Suppr超能文献

特定木质纤维素废弃生物质的升级再造与回收利用潜力

Upcycling and Recycling Potential of Selected Lignocellulosic Waste Biomass.

作者信息

Wronka Anita, Robles Eduardo, Kowaluk Grzegorz

机构信息

Institute of Wood Sciences and Furniture, Warsaw University of Life Sciences-SGGW, Nowoursynowska St. 159, 02-776 Warsaw, Poland.

University of Pau and the Adour Region, E2S UPPA, CNRS, Institute of Analytical and Physicochemical Sciences for the Environment and Materials (IPREM-UMR 5254), 40004 Mont de Marsan, France.

出版信息

Materials (Basel). 2021 Dec 16;14(24):7772. doi: 10.3390/ma14247772.

Abstract

This research aimed to confirm the ability to reduce carbon dioxide emissions by novel composite production using plantation waste on the example of lignocellulosic particles of black chokeberry ( (Michx.) Elliott) and raspberry ( L.). Furthermore, to characterize the particles produced by re-milled particleboards made of the above-mentioned alternative raw materials in the light of further recycling. As part of the research, particleboards from wooden black chokeberry and raspberry were produced in laboratory conditions, and select mechanical and physical properties were examined. In addition, the characterization of raw materials (particles) on the different processing stages was determined, and the fraction share and shape of particles after re-milling of the produced panels was provided. The tests confirmed the possibility of producing particleboards from the raw materials used; however, in the case of boards with raspberry lignocellulose particles, their share cannot exceed 50% so as to comply with the European standards regarding bending strength criterion. In addition, the further utilization of chips made of re-milled panels can be limited due to the significantly different shape and fraction share of achieved particles.

摘要

本研究旨在以黑接骨木(Aronia melanocarpa (Michx.) Elliott)和树莓(Rubus idaeus L.)的木质纤维素颗粒为例,证实利用种植园废弃物生产新型复合材料来减少二氧化碳排放的能力。此外,鉴于进一步回收利用,对由上述替代原材料制成的再研磨刨花板所产生的颗粒进行特性描述。作为研究的一部分,在实验室条件下生产了由黑接骨木和树莓木材制成的刨花板,并对选定的机械和物理性能进行了检测。此外,还确定了不同加工阶段原材料(颗粒)的特性,并给出了所生产板材再研磨后颗粒的级分占比和形状。测试证实了使用所采用的原材料生产刨花板的可能性;然而,对于含有树莓木质纤维素颗粒的板材,其占比不能超过50%,以便符合欧洲关于抗弯强度标准的规定。此外,由于所获得颗粒的形状和级分占比显著不同,再研磨板材制成的木屑的进一步利用可能会受到限制。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/4896/8709335/fbc7fdaf7bde/materials-14-07772-g001.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验