Enhanced removal of radioactive iodine anions from wastewater using modified bentonite: Experimental and theoretical study.

Efficient and cost-effective removal of radioactive iodine anions from contaminated water has become a crucial task and a great challenge for waste treatment and environmental remediation. Herein, we present hexadecylpyridinium chloride monohydrate modified bentonite (HDPy-bent) for the efficient and selective removal of iodine anions (I and IO) from contaminated water. Batch experiments showed that HDPy-bent could remove more than 95% of I and IO within 10 min, and had maximum I and IO adsorption capacities of 80.0 and 50.2 mg/g, respectively. Competitive experiments indicated that HDPy-bent exhibited excellent I and IO selectivity in the excessive presence of common concomitant anions including PO, SO, HCO, NO, Cl (maximum mole ratio of anions vs iodine anions was ∼50,000). An anion exchange mechanism was proposed for the selective adsorption of iodine anions. Optimal adsorption structure of HDPy/I (IO) at atomic level and driving forces of the I (IO) adsorption were calculated by density functional theory (DFT) simulations. Moreover, the good durability and reusability of the HDPy-bent has been demonstrated with 5 adsorption-desorption cycles. Dynamic column experiment also demonstrated that HDPy-bent exhibited excellent removal and fractional recovery capabilities towards I and IO from simulated groundwater and environmental water samples. In conclusion, this work presents a promising adsorbent material for the decontamination of radioactive iodine anions from wastewater on a large scale.