Effects of pipe materials on the characteristic recognition, disinfection byproduct formation, and toxicity risk of pipe wall biofilms during chlorination in water supply pipelines.

There are growing concerns over the contributions of biofilms to disinfection byproduct (DBP) formation in engineered water systems (EWSs). Three kinds of water supply pipes, ductile iron (DI), cement-lined stainless steel (SS) and polyethylene (PE) pipes, were selected for the experiment conducted in this study. Based on test results, the three pipe biofilms showed relatively obvious differences in growth, morphological characteristics, organic components and bacterial diversity. Secreted extracellular polymeric substance (EPS) accounted for more than 90% of the biofilm and had greater disinfection byproduct formation potential (DBPFP) than the cell phases. DI pipe wall biofilms had the highest DBPFP, which to a certain extent means that denser and richer organic matter can be produced as the precursor of different types of DBPs. UHPLC-Q Exactive was used to identify the types of DBPs generated from the chlorination of histidine (His), alanine (Ala) and tryptophan (Trp) shared by the three pipe materials and their formation pathways. Compared to carbonaceous disinfection by-products (C-DBPs), nitrogenous disinfection by-products (N-DBPs) had a significant advantage in toxicity generation potentials in the biofilms, especially dichloroacetonitrile (DCAN) and trichloronitromethane (TCNM). DCAN and haloacetic acids (HAAs) were the key to cytotoxicity in biofilms, while TCNM was dominant in biofilm genotoxicity.