Department of Neurosurgery, McGovern Medical School, The University of Texas Health Science Center at Houston (UT Health), Houston, Texas, USA.
Oper Neurosurg (Hagerstown). 2022 Mar 1;22(3):171-178. doi: 10.1227/ONS.0000000000000059.
Methodological approaches to deep brain stimulation (DBS) continue to evolve from awake frame-based to asleep frameless procedures with robotic assistance, primarily directed to optimize operative efficiency, lead accuracy, and patient comfort. Comparison between the 2 is scarce.
To analyze the impacts of methodological differences on operative efficiency and stereotactic accuracy using a frame compared with a frameless robotic platform while maintaining the awake state and use of multiple microelectrode recording (MER) trajectories.
Thirty-four consecutive patients who underwent bilateral awake frameless robot-assisted DBS were compared with a previous cohort of 30 patients who underwent frame-based surgery. Patient demographics, operative times, and MER data were collected for both cohorts. Two-dimensional radial errors of lead placements were calculated.
Preoperative setup, surgical, and total operating room times were all significantly greater for the robot-assisted cohort (P < .001). The need for computed tomography imaging when referencing the robotic fiducials led to increased setup duration because of patient transport, unnecessary for the frame-based cohort. Multiple simultaneous MER trajectories increased surgical time (mean 26 min) for the robot-assisted cohort only. The mean radial errors in the robot-assisted and frame cohorts were 0.98 ± 0.66 and 0.74 ± 0.49 mm (P = .03), respectively.
The use of a truly frameless robotic platform such as the Mazor Renaissance (Mazor Robotics Ltd) presented challenges when implementing techniques used during awake frame-based surgery. Maintaining good accuracy, intraoperative reference imaging, and limited MER trajectories will help integrate frameless robot assistance into the awake DBS surgical workflow.
深部脑刺激(DBS)的方法学不断从清醒框架手术向有机器人辅助的无框架手术演变,主要目的是优化手术效率、提高准确性并提高患者舒适度。但这两种方法之间的比较很少。
在保持清醒状态和使用多个微电极记录(MER)轨迹的情况下,使用框架与无框架机器人平台分析方法学差异对手术效率和立体定向准确性的影响。
将 34 例连续接受双侧清醒无框架机器人辅助 DBS 的患者与之前接受框架手术的 30 例患者进行比较。收集两组患者的人口统计学资料、手术时间和 MER 数据。计算了导丝放置的二维径向误差。
机器人辅助组的术前准备、手术和总手术室时间均显著延长(P<0.001)。由于患者运输,当参考机器人基准时需要进行 CT 成像,这导致框架组的准备时间增加。机器人辅助组的多个同时 MER 轨迹仅增加了手术时间(平均 26 分钟)。机器人辅助组和框架组的平均径向误差分别为 0.98±0.66 和 0.74±0.49mm(P=0.03)。
使用像 Mazor Renaissance(Mazor Robotics Ltd)这样真正的无框架机器人平台在实施清醒框架手术期间使用的技术时带来了挑战。保持良好的准确性、术中参考成像和有限的 MER 轨迹将有助于将无框架机器人辅助整合到清醒 DBS 手术工作流程中。