Bahtiar Ayi, Hardiati Mila Sri, Faizal Ferry, Muthukannan Vanitha, Panatarani Camellia, Joni I Made
Department of Physics, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Jalan Raya Bandung-Sumedang KM 21, Jatinangor, Sumedang 45363, West Java, Indonesia.
Functional Nano Powder University Center of Excellence (FiNder U CoE), Universitas Padjadjaran, Jalan Raya Bandung-Sumedang KM 21, Jatinangor, Sumedang 45363, West Java, Indonesia.
Nanomaterials (Basel). 2022 Jan 19;12(3):314. doi: 10.3390/nano12030314.
Recently, sophisticated technologies are applied to design a certain surface nature that can have superhydrophobic properties. Thus, a simple spray technique was introduced to prepare a superhydrophobic surface using rGO with Ni-S system (rGO-Ni) by using NiSO catalyst under microwave irradiation at various reaction times of 5, 10, 20, and 30 min. The GO reduction was conducted at a fixed Ar/H ratio, a flow rate of 0.4 L/min, microwave power of 720 W, and a mass of 0.5 g. GO powder with nickel sulfate catalyst was treated under Ar/H (4:1) mixture for GO reduction, where Ar and H were expected to prevent the rebinding of oxygen released from GO. The result of XRD and Raman measurement confirms that rGO-Ni prepared at reaction time 20 min exhibit the highest reduction of GO and the presence of various Ni-S crystal structures such as NiS, NiS, NiS, and NiS due to decomposition of NiSO. The rGO-Ni coating performance shows superhydrophobic nature with a contact angle of 150.1°. The AFM images show that the addition of nickel to rGO produces a quasi-periodic spike structure, which increases the superhydrophobicity of the r-GO-Ni coated glass with a contact angle of 152.6°. It is emphasized that the proposed simple spray coating using rGO-Ni provides a more favorable option for industry application in obtaining superhydrophobic surfaces.
最近,先进技术被应用于设计具有超疏水特性的特定表面性质。因此,引入了一种简单的喷涂技术,在微波辐射下,使用NiSO催化剂,在5、10、20和30分钟的不同反应时间下,用rGO与Ni-S体系(rGO-Ni)制备超疏水表面。在固定的Ar/H比、0.4 L/min的流速、720 W的微波功率和0.5 g的质量下进行GO还原。将带有硫酸镍催化剂的GO粉末在Ar/H(4:1)混合物下处理以进行GO还原,其中Ar和H有望防止从GO释放的氧重新结合。XRD和拉曼测量结果证实,在20分钟反应时间制备的rGO-Ni表现出最高的GO还原率,并且由于NiSO的分解,存在各种Ni-S晶体结构(如NiS₂、Ni₃S₂、Ni₃S₄和NiS)。rGO-Ni涂层性能表现出超疏水性质,接触角为150.1°。AFM图像显示,向rGO中添加镍会产生准周期性尖峰结构,这增加了r-GO-Ni涂层玻璃的超疏水性,接触角为152.6°。需要强调的是,所提出的使用rGO-Ni的简单喷涂方法为工业应用中获得超疏水表面提供了更有利的选择。