Suppr超能文献

使用丙烯酸六氟丁酯涂层锥形光纤检测有机硫和有机磷化合物。

Detection of Organosulfur and Organophosphorus Compounds Using a Hexafluorobutyl Acrylate-Coated Tapered Optical Fibers.

作者信息

Stasiewicz Karol A, Jakubowska Iwona, Dudek Michał

机构信息

Institute of Applied Physics, Military University of Technology, 00-908 Warsaw, Poland.

出版信息

Polymers (Basel). 2022 Feb 4;14(3):612. doi: 10.3390/polym14030612.

Abstract

This paper presents the results of a study on the possibility of detecting organosulfur and organophosphorus compounds by means of polymer-assisted optical fiber technology. The detection of the aforementioned compounds can be realized by fabricating a polymer-coated tapered optical fiber (TOF), where the polymer works as an absorber, which changes the light propagation conditions in the TOF. The TOFs were manufactured based on a standard single-mode fiber for telecommunication purposes and, as an absorbing polymer, hexafluorobutyl acrylate was used, which is sensitive to organosulfur and organophosphorus compounds. The spectral measurements were conducted in a wide optical range-500-1800 nm-covering the visible part of the spectrum as well as near infrared part in order to show the versatility of the proposed solution. Additionally, detailed absorption dynamics measurements were provided for a single wavelength of 1310 nm. The analyses were conducted for two concentrations of evaporating compounds, 10 µL and 100 µL, in a volume of 150 mL. Additionally, a temperature dependency analysis and tests with distilled water were carried out to eliminate the influence of external factors. The results presented in this article confirmed the possibility to provide low-cost sensors for dangerous and harmful chemical compounds using optical fiber technology and polymers as sensitive materials.

摘要

本文介绍了一项关于利用聚合物辅助光纤技术检测有机硫和有机磷化合物可能性的研究结果。上述化合物的检测可通过制造聚合物涂层锥形光纤(TOF)来实现,其中聚合物作为吸收体,改变了TOF中的光传播条件。TOF基于用于电信目的的标准单模光纤制造,作为吸收聚合物,使用了对有机硫和有机磷化合物敏感的丙烯酸六氟丁酯。光谱测量在500 - 1800 nm的宽光学范围内进行,涵盖光谱的可见光部分以及近红外部分,以展示所提出解决方案的通用性。此外,还针对1310 nm的单一波长提供了详细的吸收动力学测量。分析针对两种蒸发化合物浓度进行,分别为10 µL和100 µL,体积为150 mL。此外,还进行了温度依赖性分析以及用蒸馏水进行的测试,以消除外部因素的影响。本文给出的结果证实了利用光纤技术和聚合物作为敏感材料来提供用于检测危险和有害化合物的低成本传感器的可能性。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/d72a/8839595/4bba819b54f7/polymers-14-00612-g001.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验