Suppr超能文献

多模态医学成像头颈部体模:第 2 部分。医学成像。

A multi-modality medical imaging head and neck phantom: Part 2. Medical imaging.

机构信息

Radiology, Nepean Blue Mountains Local Health District, New South Wales Health, Derby Street, Penrith 2750, NSW, Australia; School of Engineering, Faculty of Science, Macquarie University, Balaclava Rd, Macquarie Park 2109, NSW, Australia.

School of Engineering, Faculty of Science, Macquarie University, Balaclava Rd, Macquarie Park 2109, NSW, Australia.

出版信息

Phys Med. 2022 Apr;96:179-197. doi: 10.1016/j.ejmp.2022.02.009. Epub 2022 Feb 23.

Abstract

The head and neck phantom discussed in an accompanying paper (part 1), is imaged with MRI, X-ray CT, PET and ultrasound. MRI scans show a distinct image contrast between the brain compartment and other anatomical regions of the head. The silicone matrix that was used to create a porous brain compartment has a relatively high proton density and a spin-spin relaxation time (T) that is long enough to provide an MRI signal. While the longitudinal magnetization was found to recover according to a mono-exponential, a bi-exponential decay was observed for the transverse relaxation with a slow T relaxation component corresponding to the perfusate and a fast T relaxation component corresponding to the silicone. The fraction of the slow T relaxation component increases upon perfusion. A dynamic contrast enhanced (DCE) MRI experiment is conducted in which the injection rate of the contrast agent is varied. Parametric DCE maps are created and reveal regional differences in contrast agent kinetics as a result of differences in porosity. The skull, vertebra and the brain compartment are clearly visible on X-ray CT. Dynamic PET scanning has been performed while the carotic arterial input function is monitored by use of a Geiger-Müller counter. Similar regions of perfusion are found in the PET study as in the DCE MRI study. By doping the perfusate with a lipid micelle emulsion, the phantom is applicable for carotic Doppler ultrasound demonstration and validation.

摘要

在一篇相关的论文(第一部分)中讨论了头颈部体模,它可通过 MRI、X 射线 CT、PET 和超声进行成像。MRI 扫描显示了脑腔与头部其他解剖区域之间明显的图像对比。用于创建多孔脑腔的硅基质具有相对较高的质子密度和自旋-自旋弛豫时间(T),足以提供 MRI 信号。虽然发现纵向磁化根据单指数恢复,但横向弛豫观察到双指数衰减,其中慢 T 弛豫分量对应灌注液,快 T 弛豫分量对应硅酮。灌注时,慢 T 弛豫分量的分数增加。进行了动态对比增强(DCE)MRI 实验,其中改变了造影剂的注射速率。创建了参数化 DCE 图谱,并由于孔隙率的差异揭示了造影剂动力学的区域差异。颅骨、椎骨和脑腔在 X 射线 CT 上清晰可见。在通过盖革-弥勒计数器监测颈总动脉输入函数的同时进行了动态 PET 扫描。在 PET 研究中发现了与 DCE MRI 研究中相似的灌注区域。通过用脂质胶束乳液掺杂灌注液,该体模适用于颈总动脉多普勒超声的演示和验证。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验