Department of Radiology, Weill Cornell Medicine, New York, New York, USA.
Department of Radiology, Hospital for Special Surgery, New York, New York, USA.
Med Phys. 2023 Jun;50(6):3498-3510. doi: 10.1002/mp.16255. Epub 2023 Feb 14.
The development of materials with tailored signal intensity in MR imaging is critically important both for the reduction of signal from non-tissue hardware, as well as for the construction of tissue-mimicking phantoms. Silicone-based phantoms are becoming more popular due to their structural stability, stretchability, longer shelf life, and ease of handling, as well as for their application in dynamic imaging of physiology in motion. Moreover, silicone can be also used for the design of stretchable receive radio-frequency (RF) coils.
Fabrication of materials with tailored signal intensity for MRI requires knowledge of precise T and T relaxation times of the materials used. In order to increase the range of possible relaxation times, silicone materials can be doped with gadolinium (Gd). In this work, we aim to systematically evaluate relaxation properties of Gd-doped silicone material at a broad range of Gd concentrations and at three clinically relevant magnetic field strengths (1.5 T, 3 T, and 7 T). We apply the findings for rendering silicone substrates of stretchable receive RF coils less visible in MRI. Moreover, we demonstrate early stage proof-of-concept applicability in tissue-mimicking phantom development.
Ten samples of pure and Gd-doped Ecoflex silicone polymer samples were prepared with various Gd volume ratios ranging from 1:5000 to 1:10, and studied using 1.5 T and 3 T clinical and 7 T preclinical scanners. T and T relaxation times of each sample were derived by fitting the data to Bloch signal intensity equations. A receive coil made from Gd-doped Ecoflex silicone polymer was fabricated and evaluated in vitro at 3 T.
With the addition of a Gd-based contrast agent, it is possible to significantly change T relaxation times of Ecoflex silicone polymer (from 213 ms to 20 ms at 1.5 T; from 135 ms to 17 ms at 3 T; and from 111.4 ms to 17.2 ms at 7 T). T relaxation time is less affected by the introduction of the contrast agent (changes from 608 ms to 579 ms; from 802.5 ms to 713 ms at 3 T; from 1276 ms to 979 ms at 7 T). First results also indicate that liver, pancreas, and white matter tissues can potentially be closely mimicked using this phantom preparation technique. Gd-doping reduces the appearance of the silicone-based coil substrate during the MR scan by up to 81%.
Gd-based contrast agents can be effectively used to create Ecoflex silicone polymer-based phantoms with tailored T relaxation properties. The relative low cost, ease of preparation, stretchability, mechanical stability, and long shelf life of Ecoflex silicone polymer all make it a good candidate for "MR invisible" coil development and bears promise for tissue-mimicking phantom development applicability.
在磁共振成像中开发具有特定信号强度的材料对于降低非组织硬件的信号以及构建组织模拟体模至关重要。由于其结构稳定性、可拉伸性、更长的保质期和易于处理,硅酮基体模变得越来越受欢迎,并且它们也可用于运动中生理的动态成像。此外,硅酮还可用于设计可拉伸的接收射频 (RF) 线圈。
为了进行 MRI 中具有特定信号强度的材料的制造,需要了解所使用材料的精确 T 和 T2 弛豫时间。为了增加可能的弛豫时间范围,可以用钆 (Gd) 掺杂硅酮材料。在这项工作中,我们的目的是系统地评估在三种临床相关磁场强度(1.5 T、3 T 和 7 T)下,不同 Gd 浓度范围内 Gd 掺杂硅酮材料的弛豫特性。我们将这些发现应用于使可拉伸接收 RF 线圈的硅酮基质在 MRI 中不那么明显。此外,我们还展示了在组织模拟体模开发中的早期概念验证适用性。
用不同的 Gd 体积比(从 1:5000 到 1:10)制备了 10 个纯 Ecoflex 硅酮聚合物和 Gd 掺杂 Ecoflex 硅酮聚合物样品,并使用 1.5 T 和 3 T 临床和 7 T 临床前扫描仪进行研究。通过将数据拟合到 Bloch 信号强度方程,得出每个样品的 T 和 T2 弛豫时间。制作了一个由 Gd 掺杂 Ecoflex 硅酮聚合物制成的接收线圈,并在 3 T 下进行了体外评估。
通过添加基于 Gd 的造影剂,可以显著改变 Ecoflex 硅酮聚合物的 T1 弛豫时间(在 1.5 T 时从 213 ms 变为 20 ms;在 3 T 时从 135 ms 变为 17 ms;在 7 T 时从 111.4 ms 变为 17.2 ms)。T2 弛豫时间受造影剂引入的影响较小(在 3 T 时从 608 ms 变为 579 ms;从 802.5 ms 变为 713 ms;在 7 T 时从 1276 ms 变为 979 ms)。初步结果还表明,使用这种体模制备技术,肝脏、胰腺和白质组织可能能够被很好地模拟。Gd 掺杂可使基于硅酮的线圈基质在 MR 扫描中的外观降低多达 81%。
基于 Gd 的造影剂可有效用于创建具有特定 T1 弛豫特性的 Ecoflex 硅酮聚合物体模。Ecoflex 硅酮聚合物的相对低成本、易于制备、可拉伸性、机械稳定性和长保质期使其成为“MR 不可见”线圈开发的良好候选材料,并有望在组织模拟体模开发中得到应用。