Rathi Aanchal, Basu Soumen, Barman Sanghamitra
School of Chemistry and Biochemistry, Thapar Institute of Engineering and Technology, India.
School of Chemistry and Biochemistry, Thapar Institute of Engineering and Technology, India.
Chemosphere. 2022 Jul;298:134260. doi: 10.1016/j.chemosphere.2022.134260. Epub 2022 Mar 7.
Metronidazole (MET), a recalcitrant antibiotic from the nitro-imidazole family and commercially used Rhodamine B (RhB) dye, contributes a huge to water pollution, which needs to eliminate, preferably by photocatalytic degradation technique. The Cdots@zeolite (CDZ) nanocomposites with different weight ratios (1:1, 1:3, 1:5, 5:1, 1:7) were synthesized hydrothermally to degrade MET and RhB molecules. The CDZ composites were characterized by XRD, BET, EDS, and XPS technique which verifies the crystalline nature, incorporation of C-dots into zeolite frameworks with high surface area (∼187 m/g). The morphology, d-spacing and lattice planes were analyzed by SEM images, HR-TEM and SAED analysis. The maximum degradation (∼79%) was achieved at an optimum catalyst dose of 0.2 g/L and pH 4 for MET and that of RhB was ∼90% at a catalyst dose of 0.4 g/L. The PZC (point of zero charge) value for CDZ composite was about pH 3.4, which justifies the maximum removal of MET at pH 4. The obtained rate constants 'k' were found to be 0.0081, 0.0041, and 0.0101 min in sun, UV, and visible light sources, respectively. The real industrial wastewater sample has been treated to give ∼68% of COD and ∼62% TOC removal. Moreover, the intermediates of plausible degradation pathways were identified by the m/z values obtained from GC-MS analysis.
甲硝唑(MET)是一种来自硝基咪唑家族的难降解抗生素,以及商业使用的罗丹明B(RhB)染料,对水污染有巨大影响,需要通过光催化降解技术予以消除。通过水热法合成了不同重量比(1:1、1:3、1:5、5:1、1:7)的Cdots@沸石(CDZ)纳米复合材料,用于降解MET和RhB分子。通过XRD、BET、EDS和XPS技术对CDZ复合材料进行了表征,证实了其晶体性质、C点掺入具有高表面积(约187 m/g)的沸石骨架中。通过SEM图像、高分辨透射电子显微镜(HR-TEM)和选区电子衍射(SAED)分析对其形态、d间距和晶格平面进行了分析。对于MET,在最佳催化剂剂量为0.2 g/L和pH值为4时实现了最大降解率(约79%);对于RhB,在催化剂剂量为0.4 g/L时最大降解率约为90%。CDZ复合材料的零电荷点(PZC)值约为pH 3.4,这解释了在pH 4时MET的最大去除率。发现获得的速率常数“k”在太阳光、紫外光和可见光下分别为0.0081、0.0041和0.0101 min。实际工业废水样本经过处理后,化学需氧量(COD)去除率约为68%,总有机碳(TOC)去除率约为62%。此外,通过气相色谱-质谱联用(GC-MS)分析获得的m/z值确定了可能的降解途径的中间体。