Suppr超能文献

旋后内收垂直内踝骨折固定的支撑钢板与新型螺钉单固定系统:尸体生物力学研究。

Supination Adduction Vertical Medial Malleolar Fracture Fixation with Buttress Plating vs a Novel Screw-Only Construct: A Cadaveric Biomechanical Study.

机构信息

Department of Orthopaedic Surgery, Brown University/Warren Alpert School of Medicine, Providence, RI, USA.

Brown University/Warren Alpert School of Medicine, Providence, RI, USA.

出版信息

Foot Ankle Int. 2022 Jun;43(6):810-817. doi: 10.1177/10711007221078576. Epub 2022 Mar 16.

Abstract

BACKGROUND

Supination adduction ankle fractures are unique among rotational ankle fractures as plate constructs are more commonly used than independent screws for medial malleolar fixation. The purpose of this study was to compare fracture displacement between plate fixation to a novel screw-only construct using a cadaveric biomechanical early-weightbearing model for the treatment of vertical medial malleolus fractures.

METHODS

Six nonosteoporotic fresh-frozen cadaver shanks and feet in matched pairs underwent a vertical osteotomy of the medial malleolus to simulate the supination adduction type injury. Osteoporosis was measured using DEXA scans. One specimen from each pair was fixed with a one-third tubular buttress plate and the other with screw-only fixation. The specimens were then axially loaded for 100 000 cycles to simulate protected weightbearing, and subsequently loaded to failure in supination. Stiffness, fracture displacement, and load to failure were recorded. Statistical significance was set at <.05.

RESULTS

There were no measurable differences in displacement between the 2 constructs during axial cyclic loading after 100 000 cycles (plate, 0.74 ± 0.09 mm; screws, 0.79 ± 0.18 mm; = .225). During supination and axial load to failure, the plate outperformed the screw construct. For load to failure (2 mm displacement) at the fracture site, the plate group failed at 716 ± 240 N, whereas the screw group failed at 567 ± 237 N ( = .015). During load to catastrophic failure, the plate group outperformed the screw group (plate, 6011 ± 1646 N; screws, 4578 ± 1837 N; = .002).

CONCLUSION

For vertical medial malleolar fractures, the screw-only construct demonstrated no statistical difference when compared to buttress plating for cyclical axial loading, simulating early weightbearing in a boot. However, buttress plating is 21% to 24% stronger than the screw-only fixation construct in overall strength and prevention of catastrophic failure when loading in a supinated position.

CLINICAL RELEVANCE

The screw-only construct is biomechanically similar to a buttress plate when simulating early protected weightbearing. This suggests that early weightbearing as tolerated in a controlled ankle motion boot beginning 2 weeks postoperatively is mechanically safe for this fracture pattern and does not result in unacceptable amounts of fracture displacement. This construct may be useful as a less invasive treatment modality for the treatment of vertical medial malleolus fractures in select patients.

摘要

背景

旋后内收踝骨折在旋转性踝骨折中较为独特,因为在治疗内踝骨折时,板状结构比独立螺钉更常用。本研究的目的是比较使用新型螺钉固定与钢板固定在治疗垂直内踝骨折的早期负重生物力学模型中的骨折移位情况。

方法

将 6 个非骨质疏松性新鲜冷冻尸体小腿和足部配对进行内踝垂直切开,模拟旋后内收型损伤。使用 DEXA 扫描测量骨质疏松症。每对标本中的一个标本用三分之一管状支撑钢板固定,另一个用螺钉固定。然后对标本进行轴向加载 10 万次,模拟保护性负重,然后在旋后内收位加载至失效。记录刚度、骨折移位和失效载荷。统计显著性设定为 <.05。

结果

在经过 10 万次轴向循环加载后,两种固定方式在轴向循环加载过程中没有明显的差异(钢板组为 0.74 ± 0.09 mm;螺钉组为 0.79 ± 0.18 mm; =.225)。在旋后和轴向加载至失效过程中,钢板组的表现优于螺钉组。对于骨折部位的失效载荷(2 mm 位移),钢板组在 716 ± 240 N 时失效,而螺钉组在 567 ± 237 N 时失效( =.015)。在灾难性失效载荷下,钢板组的表现优于螺钉组(钢板组为 6011 ± 1646 N;螺钉组为 4578 ± 1837 N; =.002)。

结论

对于垂直内踝骨折,在模拟 boot 早期保护性负重的情况下,与支撑钢板相比,螺钉固定在轴向循环加载时没有统计学差异。然而,在旋后位置加载时,支撑钢板的整体强度和防止灾难性失效的能力比螺钉固定结构强 21%至 24%。

临床相关性

在模拟早期保护性负重时,螺钉固定结构与支撑钢板在生物力学上相似。这表明,对于这种骨折类型,术后 2 周开始,在控制踝关节运动靴中尽可能早地负重是安全的,不会导致不可接受的骨折移位量。对于某些患者的垂直内踝骨折,这种固定结构可能是一种更具侵入性的治疗方法。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验