侵蚀性饮料和抛光系统对纳米复合树脂表面性能的影响。

The effect of erosive beverages and polishing systems on the surface properties of nanohybrid composite resin.

机构信息

Department of Restorative Dentistry, Faculty of Dentistry, Giresun University, Giresun, Turkey.

Department of Restorative Dentistry, Faculty of Dentistry, Atatürk University, Erzurum, Turkey.

出版信息

Niger J Clin Pract. 2022 Mar;25(3):248-254. doi: 10.4103/njcp.njcp_1361_21.

DOI:10.4103/njcp.njcp_1361_21

PMID:35295044

Abstract

AIMS AND BACKGROUND

The aim of this study is to evaluate the surface microhardness and roughness of composites treated with three different polishing systems exposed to two different corrosive beverages.

MATERIAL AND METHODS

Ninety-six composite resin disks were randomly divided into four groups, one of which was the control group. The surface roughness and microhardness values were measured after 24 h in the polishing process. The samples were divided into three subgroups and kept in distilled water, cola, and ice tea for 20 min a day for 14 days. Then, the roughness and microhardness measurements of the samples were taken again. Two samples randomly selected from each group were examined using a scanning electron microscope (SEM) and analyzed statistically using the two way anova (ANOVA) and Duncan tests.

RESULTS

A statistically significant difference was found between the roughness and hardness values at the end of 24 h and 14 days. Onegloss (OG), Dentoflex (DF), and Super-snap (SNP) polish systems showed the highest roughness in the cola group, respectively. Microhardness values: The unpolished group had the lowest significant microhardness in the coke group (P < 0.05).

CONCLUSION

In this study, it was seen that the lowest success rate was the OG polishing system.

摘要

目的和背景

本研究旨在评估三种不同抛光系统处理后的复合材料的表面显微硬度和粗糙度，同时暴露于两种不同腐蚀性饮料中。

材料和方法

将 96 个复合树脂圆盘随机分为四组，其中一组为对照组。在抛光过程 24 小时后测量表面粗糙度和显微硬度值。将样本分为三组，每天在蒸馏水、可乐和冰茶中浸泡 20 分钟，持续 14 天。然后，再次对样本的粗糙度和显微硬度进行测量。从每组中随机选择两个样本，使用扫描电子显微镜（SEM）进行检查，并使用双因素方差分析（ANOVA）和 Duncan 检验进行统计分析。