Membrane Separations Laboratory, Process Engineering, and Technology Transfer Division, CSIR - Indian Institute of Chemical Technology, Hyderabad, 500007, India.
Academy of Scientific and Innovative Research (AcSIR), Ghaziabad, Uttar Pradesh, 201 002, India.
Appl Biochem Biotechnol. 2022 Aug;194(8):3400-3418. doi: 10.1007/s12010-022-03822-x. Epub 2022 Mar 31.
The present study focuses on synthesis of novel high-performance acrylic acid (AA) grafted polyethersulfone (PES) ultrafiltration (UF) membranes for purification of small therapeutic biomolecules such as urea, insulin, and cobalamin. The membranes were indigenously synthesized by adding polyethylene glycol (PEG) of 6 kDa M.Wt. as a pore former and subsequent grafting of AA using 2 to 6 wt.% concentrations under UV-induced photo grafting. Scanning electron microscopy reveals that the PEG additive profoundly influences the pore density on the membrane surface. FTIR spectra confirm the graft polymerization of AA with the PES substrate. Separation performance of the grafted membranes was evaluated to establish the trade-off between the degree of grafting and MWCO. From the experimental results, the pure water flux (PWF) of 6% grafted PES membrane was enhanced from 8.5 (PES [0] [6]) to 18.20 l m h (PES [6 +] [6]) in the presence of PEG pore former, respectively. The grafting concentration window of 2-6% resulted in selective membranes to altogether remove uremic toxins into the permeate with retention of high molecular size proteins. Hence, 5 and 6 wt.% AA grafted membranes exhibited > 90% rejection for insulin and cobalamin biomolecules along with 24.5 and 23.8 l m h bar permeability towards urea, respectively. The process results correlate well with the MWCO values of membranes ranging from 1 to 10 kDa. This work provides the efficacy of these grafted membranes for potential application in the downstream processing of therapeutic biomolecules such as insulin and cobalamin.
本研究专注于合成新型高性能丙烯酸(AA)接枝聚醚砜(PES)超滤(UF)膜,用于纯化小治疗性生物分子,如尿素、胰岛素和钴胺素。这些膜是通过添加分子量为 6 kDa 的聚乙二醇(PEG)作为致孔剂,然后在紫外光诱导的光接枝下用 2 至 6 重量%的浓度接枝 AA 来原位合成的。扫描电子显微镜显示,PEG 添加剂对膜表面的孔径密度有很大影响。傅里叶变换红外光谱(FTIR)谱图证实了 AA 与 PES 基底的接枝聚合。对接枝膜的分离性能进行了评估,以建立接枝程度和 MWCO 之间的权衡。从实验结果来看,在添加 PEG 致孔剂的情况下,6%接枝 PES 膜的纯水通量(PWF)从 8.5(PES[0][6])提高到 18.20 l m h(PES[6+][6])。2-6%的接枝浓度窗口导致选择性膜将尿毒症毒素全部截留到渗透物中,同时保留高分子量的蛋白质。因此,5%和 6%的 AA 接枝膜对胰岛素和钴胺素生物分子的截留率分别超过 90%,对尿素的渗透速率分别为 24.5 和 23.8 l m h bar。该工艺结果与 MWCO 值相关良好,MWCO 值范围从 1 到 10 kDa。这项工作为这些接枝膜在治疗性生物分子(如胰岛素和钴胺素)的下游加工中的潜在应用提供了依据。