Nguyen-Dang Tung, Chae Sangmin, Chatsirisupachai Jirat, Wakidi Hiba, Promarak Vinich, Visell Yon, Nguyen Thuc-Quyen
Center for Polymers and Organic Solids, University of California, Santa Barbara, Santa Barbara, CA, 93106, USA.
Department of Materials Science and Engineering, School of Molecular Science and Engineering, Vidyasirimedhi Institute of Science and Technology, Wangchan, Rayong, 21210, Thailand.
Adv Mater. 2022 Jun;34(23):e2200274. doi: 10.1002/adma.202200274. Epub 2022 Apr 28.
Reconfigurable organic logic devices are promising candidates for next generations of efficient computing systems and adaptive electronics. Ideally, such devices would be of simple structure and design, be power efficient, and compatible with high-throughput microfabrication techniques. This work reports an organic reconfigurable logic gate based on novel dual-mode organic electrochemical transistors (OECTs), which employ a self-doped conjugated polyelectrolyte as the active material, which then allows the transistors to operate in both depletion mode and enhancement mode. Furthermore, mode switching is accomplished by simply altering the polarity of the applied gate and drain voltages, which can be done on the fly. In contrast, achieving similar mode-switching functionality with other organic transistors typically requires complex molecular design or multi-device engineering. It in shown that dual-mode functionality is enabled by the concurrent existence of anion doping and cation dedoping of the films. A device physics model that accurately describes the behavior of these transistors is developed. Finally, the utility of these dual-mode transistors for implementing reconfigurable logic by fabricating a logic gate that may be switched between logic gates AND to NOR, and OR to NAND on the fly is demonstrated.
可重构有机逻辑器件是下一代高效计算系统和自适应电子学的有前途的候选者。理想情况下,此类器件结构和设计应简单、节能,并与高通量微加工技术兼容。这项工作报道了一种基于新型双模有机电化学晶体管(OECT)的有机可重构逻辑门,该晶体管采用自掺杂共轭聚电解质作为活性材料,从而使晶体管能够在耗尽模式和增强模式下工作。此外,通过简单地改变施加的栅极和漏极电压的极性即可实现模式切换,这可以即时完成。相比之下,使用其他有机晶体管实现类似的模式切换功能通常需要复杂的分子设计或多器件工程。结果表明,薄膜中同时存在阴离子掺杂和阳离子去掺杂实现了双模功能。开发了一个准确描述这些晶体管行为的器件物理模型。最后,通过制造一个可以即时在与门到或非门以及或门到与非门之间切换的逻辑门,证明了这些双模晶体管在实现可重构逻辑方面的实用性。