Health & Environmental Applications Division, ExxonMobil Biomedical Sciences, Annandale, New Jersey, USA.
Upstream Research, Imperial, Calgary, Alberta, Canada.
Environ Toxicol Chem. 2022 Jul;41(7):1613-1622. doi: 10.1002/etc.5340.
Biomimetic extraction using solid-phase microextraction is a passive sampling analytical method that can predict the aquatic toxicity of complex petroleum substances. The method provides a nonanimal alternative to traditional bioassays with the potential to reduce both vertebrate and invertebrate aquatic toxicity testing. The technique uses commercially available polydimethylsiloxane-coated fibers that, following nondepletive extraction of water samples, are injected into a gas chromatograph with flame ionization detection. As the predictive nature of the method is operationally defined, it is critical that its application be harmonized with regard to extraction, analysis, and standardization parameters. Results are presented from a round robin program comparing the results from 10 laboratories analyzing four different sample sets of dissolved organics in water. Samples included two incurred oil sands process-affected waters and a cracked gas oil water accommodated fraction. A fourth sample of cracked gas oil blended in an oil sands process-affected water was analyzed to demonstrate the method's ability to differentiate between neutral and ionizable dissolved hydrocarbons. Six of the 10 laboratories applied an automated version of the method using a robotic autosampler where the critical extraction steps are precisely controlled and which permits batch screening of water samples for aquatic toxicity potential. The remaining four laboratories performed the solid-phase microextraction manually. The automated method demonstrated good reproducibility with between-laboratory variability across the six laboratories and four samples yielding a mean relative standard deviation of 14%. The corresponding between-laboratory variability across the four laboratories applying the manual extraction was 53%, demonstrating the importance of precisely controlling the extraction procedure. Environ Toxicol Chem 2022;41:1613-1622. © 2022 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.
仿生萃取采用固相微萃取是一种被动采样分析方法,可预测复杂石油物质的水生毒性。该方法为传统生物测定提供了一种非动物替代方法,具有减少脊椎动物和无脊椎动物水生毒性测试的潜力。该技术使用市售的聚二甲基硅氧烷涂覆纤维,在非消耗性提取水样后,将其注入带有火焰电离检测的气相色谱仪。由于该方法的预测性质是操作性定义的,因此必须协调其在萃取、分析和标准化参数方面的应用。本研究提供了一个十家实验室分析四组不同水样中溶解有机物的轮次对比方案的结果。水样包括两个受到油砂工艺影响的水和一个裂化瓦斯油的水合馏分。第四个裂化瓦斯油与油砂工艺影响的水混合的样品被分析,以证明该方法区分中性和可电离溶解烃的能力。十家实验室中有六家应用了一种自动化方法,该方法使用带有机器人自动进样器,该自动进样器可以精确控制关键的萃取步骤,并允许批量筛选水样的水生毒性潜力。其余四家实验室手动进行固相微萃取。自动化方法在六个实验室和四个样品中表现出良好的重现性,跨实验室的变异系数为 14%。应用手动萃取的四个实验室之间的变异系数为 53%,这表明精确控制萃取程序非常重要。环境毒理化学 2022;41:1613-1622. 2022 年作者。环境毒理化学由 Wiley Periodicals LLC 代表 SETAC 出版。