Department of Chemical, Materials and Production Engineering, University of Naples Federico II, Piazzale Tecchio 80, 80125 Fuorigrotta, Naples, Italy.
Institute of Science and Technology for Sustainable Energy and Mobility (STEMS), National Research Council of Italy (CNR), Viale Marconi 4, 80125 Naples, Italy.
Langmuir. 2022 May 10;38(18):5481-5493. doi: 10.1021/acs.langmuir.2c00053. Epub 2022 Apr 27.
Fungal cellulases generally contain a reduced amount of β-glucosidase (BG), which does not allow for efficient cellulose hydrolysis. To address this issue, we implemented an easy co-immobilization procedure of β-glucosidase and cellulase by adsorption on wrinkled mesoporous silica nanoparticles with radial and hierarchical open pore structures, exhibiting smaller (WSN) and larger (WSN-p) inter-wrinkle distances. The immobilization was carried out separately on different vectors (WSN for BG and WSN-p for cellulase), simultaneously on the same vector (WSN-p), and sequentially on the same vector (WSN-p) in order to optimize the synergy between cellulase and BG. The obtained results pointed out that the best biocatalyst is that prepared through simultaneous immobilization of BG and cellulase on the same vector (WSN-p). In this case, the adsorption resulted in 20% yield of immobilization, corresponding to an enzyme loading of 100 mg/g of support. 82% yield of reaction and 72 μmol/min·g activity were obtained, evaluated for the hydrolysis of cellulose extracted from leaves. All reactions were carried out at a standard temperature of 50 °C. The biocatalyst retained 83% of the initial yield of reaction after 9 cycles of reuse. Moreover, it had better stability than the free enzyme mixture in a wide range of temperatures, preserving 72% of the initial yield of reaction up to 90 °C.
真菌纤维素酶通常含有较少的β-葡萄糖苷酶(BG),这使得纤维素水解效率不高。为了解决这个问题,我们采用褶皱介孔硅纳米粒子(WSN),其具有径向和分级的开放孔结构,通过吸附作用将β-葡萄糖苷酶和纤维素酶进行简单的共固定化。该固定化分别在不同载体(WSN 用于 BG,WSN-p 用于纤维素酶)上进行,同时在同一载体(WSN-p)上进行,以及顺序在同一载体(WSN-p)上进行,以优化纤维素酶和 BG 之间的协同作用。所得结果表明,通过同时在同一载体(WSN-p)上固定化 BG 和纤维素酶制备的最佳生物催化剂。在这种情况下,吸附导致 20%的固定化收率,相当于 100mg/g 载体的酶负载量。在 50°C 的标准温度下,对从 叶子中提取的纤维素进行水解,获得了 82%的反应收率和 72μmol/min·g 的活性。生物催化剂在 9 次重复使用后保留了 83%的初始反应收率。此外,与游离酶混合物相比,它在较宽的温度范围内具有更好的稳定性,在 90°C 下仍保留 72%的初始反应收率。