Ali Ahmat, Jamal Ruxangul, Abdiryim Tursun
College of Chemistry and Environmental Engineering, Xinjiang Institute of Engineering Urumqi 830023 Xinjiang Uygur Autonomous Region China.
State Key Laboratory of Chemistry and Utilization of Carbon Based Energy Resources, Xinjiang University Urumqi 830046 People's Republic of China
RSC Adv. 2021 Oct 13;11(53):33425-33430. doi: 10.1039/d1ra06732j. eCollection 2021 Oct 8.
In this work, we developed a thiol-functionalized poly(3,4-ethylenedioxythiophene) hollow sphere (poly(EDOT-MeSH)/Au) polymer through a simple one-pot self-assembly method using polyvinylpyrrolidone (PVP) as a soft template. The monomer was used as both a reductant and a stabilizer to decorate gold nanoparticles (Au NPs). FTIR, XRD, EDX, SEM and TEM analyses were used to characterize the composite hollow spheres. The chemical bond between S and Au was confirmed by XPS. The electrochemical performance of the composite hollow spheres was determined by cyclic voltammetry (CV) and an ampere response timing current test. The results revealed that the poly(EDOT-MeSH)/Au hollow-sphere-based electrochemical sensor possesses excellent conductivity and high redox reversibility with detection limits (S/N = 3) of 0.2, 0.02, 0.08 and 0.05 μM in the linear ranges of 0.1-650 μM, 0.05-100 μM and 0.1-600 μM for the determination of ascorbic acid (AA), dopamine (DA), uric acid (UA) and nitrate ions (NO ), respectively. The preparation method for these composites will further the development of this type of conducting polymer/gold nano-composite material modified electrochemical sensor for biological species.
在本工作中,我们以聚乙烯吡咯烷酮(PVP)为软模板,通过简单的一锅自组装法制备了硫醇官能化聚(3,4 - 乙撑二氧噻吩)空心球(聚(EDOT - MeSH)/金)聚合物。该单体既用作还原剂又用作稳定剂来修饰金纳米颗粒(Au NPs)。采用傅里叶变换红外光谱(FTIR)、X射线衍射(XRD)、能谱分析(EDX)、扫描电子显微镜(SEM)和透射电子显微镜(TEM)分析对复合空心球进行表征。通过X射线光电子能谱(XPS)证实了S与Au之间的化学键。通过循环伏安法(CV)和安培响应计时电流测试来测定复合空心球的电化学性能。结果表明,基于聚(EDOT - MeSH)/金空心球的电化学传感器具有优异的导电性和高氧化还原可逆性,在测定抗坏血酸(AA)、多巴胺(DA)、尿酸(UA)和硝酸根离子(NO₃⁻)时,检测限(S/N = 3)分别为0.2、0.02、0.08和0.05 μM,线性范围分别为0.1 - 650 μM、0.05 - 100 μM和0.1 - 600 μM。这些复合材料的制备方法将推动这类导电聚合物/金纳米复合材料修饰的生物物种电化学传感器的发展。