Jahdi Majid, Mishra Shivani B, Nxumalo Edward N, Mhlanga Sabelo D, Mishra Ajay K
Nanotechnology and Water Sustainability Research Unit, College of Science, Engineering and Technology, University of South Africa Johannesburg Florida 1709 South Africa
DST/Mintek Nanotechnology Innovation Centre, Council for Mineral Technology (MINTEK) Private Bag X3015 Randburg 2125 South Africa.
RSC Adv. 2020 Jul 24;10(46):27662-27675. doi: 10.1039/d0ra05009a. eCollection 2020 Jul 21.
This work presents smart pathways to enhance the photocatalytic activity of TiO co-doping with fluorine (F) and platinum (Pt) to form F-Pt co-doped TiO photocatalysts and investigates the unique and unusual fluorination of the floated products. Our investigations indicate that the crystalline structure of the photocatalysts was a mixture of anatase and brookite phases and that the nanoparticles of the synthesized nanocomposites had nanometric sizes (4-25 nm). The F-Pt co-doped TiO nano-photocatalysts demonstrated degradation of sulfamethoxazole (SMX) drug of >93% within 90 min under direct solar light and 58% degradation within 360 min under a solar simulator. Thus, co-doping TiO with F and Pt atoms to form F-Pt co-doped TiO nanocomposite is an efficient pathway to achieve high photocatalytic performance escorted with the formation of floating metal-fluoropolymer, unlike pristine TiO which has less photocatalytic degradation and no generation of a floating polymer. Our photocatalytic protocol demonstrates that the degradation of SMX started with redox reactions of oxygen and water absorbed on the surface of the prepared nanocomposites to form superoxide anions (O˙) and hydroxy radicals (˙OH) which have oxidation superpower. The resultant products were subsequently fluorinated by fluoride radical ions and floated as metal-fluoropolymer.
这项工作提出了增强二氧化钛(TiO)光催化活性的智能途径,即通过氟(F)和铂(Pt)共掺杂形成F-Pt共掺杂TiO光催化剂,并研究漂浮产物独特而非同寻常的氟化作用。我们的研究表明,光催化剂的晶体结构是锐钛矿相和板钛矿相的混合物,合成的纳米复合材料的纳米颗粒具有纳米尺寸(4-25纳米)。F-Pt共掺杂TiO纳米光催化剂在直射太阳光下90分钟内对磺胺甲恶唑(SMX)药物的降解率>93%,在太阳模拟器下360分钟内降解率为58%。因此,将TiO与F和Pt原子共掺杂以形成F-Pt共掺杂TiO纳米复合材料是实现高光催化性能的有效途径,同时伴随着漂浮金属-氟聚合物的形成,这与原始TiO不同,原始TiO的光催化降解较少且不会产生漂浮聚合物。我们的光催化方案表明,SMX的降解始于吸附在制备的纳米复合材料表面的氧气和水的氧化还原反应,形成具有超强氧化能力的超氧阴离子(O˙)和羟基自由基(˙OH)。所得产物随后被氟自由基离子氟化并以金属-氟聚合物的形式漂浮。