Cristóvão Raquel O, Almeida Mafalda R, Barros Maria A, Nunes João C F, Boaventura Rui A R, Loureiro José M, Faria Joaquim L, Neves Márcia C, Freire Mara G, Ebinuma-Santos Valéria C, Tavares Ana P M, Silva Cláudia G
Laboratory of Separation and Reaction Engineering-Laboratory of Catalysis and Materials (LSRE-LCM), Department of Chemical Engineering, Faculty of Engineering, University of Porto Rua Dr Roberto Frias 4200-465 Porto Portugal
Department of Chemistry, CICECO-Aveiro Institute of Materials, University of Aveiro 3810-193 Aveiro Portugal
RSC Adv. 2020 Aug 24;10(52):31205-31213. doi: 10.1039/d0ra05534d. eCollection 2020 Aug 21.
The enzyme l-asparaginase (ASNase) presents effective antineoplastic properties used for acute lymphoblastic leukemia treatment besides their potential use in the food sector to decrease the acrylamide formation. Considering their applications, the improvement of this enzyme's properties by efficient immobilization techniques is in high demand. Carbon nanotubes are promising enzyme immobilization supports, since these materials have increased surface area and effective capacity for enzyme loading. Accordingly, in this study, multi-walled carbon nanotubes (MWCNTs) were explored as novel supports for ASNase immobilization by a simple adsorption method. The effect of pH and contact time of immobilization, as well as the ASNase to nanoparticles mass ratio, were optimized according to the enzyme immobilization yield and relative recovered activity. The enzyme-MWCNTs bioconjugation was confirmed by thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), Raman and transmission electron microscopy (TEM) studies. MWCNTs have a high ASNase loading capacity, with a maximum immobilization yield of 90%. The adsorbed ASNase retains 90% of the initial enzyme activity at the optimized conditions (pH 8.0, 60 min, and 1.5 × 10 g mL of ASNase). According to these results, ASNase immobilized onto MWCNTs can find improved applications in several areas, namely biosensors, medicine and food industry.
L-天冬酰胺酶(ASNase)除了在食品领域有可能用于减少丙烯酰胺形成外,还具有用于治疗急性淋巴细胞白血病的有效抗肿瘤特性。考虑到其应用,通过高效固定化技术改善这种酶的特性的需求很高。碳纳米管是很有前景的酶固定化载体,因为这些材料具有增加的表面积和有效的酶负载能力。因此,在本研究中,通过简单的吸附方法探索了多壁碳纳米管(MWCNTs)作为ASNase固定化的新型载体。根据酶固定化产率和相对回收活性,优化了固定化的pH值、接触时间以及ASNase与纳米颗粒的质量比。通过热重分析(TGA)、傅里叶变换红外光谱(FTIR)、拉曼光谱和透射电子显微镜(TEM)研究证实了酶与MWCNTs的生物共轭。MWCNTs具有高ASNase负载能力,最大固定化产率为90%。在优化条件(pH 8.0、60分钟和1.5×10 g/mL的ASNase)下,吸附的ASNase保留了初始酶活性的90%。根据这些结果,固定在MWCNTs上的ASNase可以在生物传感器、医学和食品工业等几个领域找到改进的应用。