Tanum Junjira, Choi Moonhyun, Jeong Hyejoong, Park Sohyeon, Sutthiwanjampa Chanutchamon, Park Hansoo, Hong Jinkee
Department of Chemical and Biomolecular Engineering, Yonsei University, Seoul 03722, Republic of Korea.
School of Integrative Engineering, Chung-Ang University, Seoul 06974, Republic of Korea.
Chem Eng J. 2022 Oct 15;446:137054. doi: 10.1016/j.cej.2022.137054. Epub 2022 May 18.
Viruses/bacteria outbreaks have motivated us to develop a fabric that will inhibit their transmission with high potency and long-term stability. By creating a metal-ion-rich surface onto polyester (PET) fabric, a method is found to inhibit hospital-acquired infections by immobilizing microorganisms on its surface. ZIF-8 and APTES are utilized to overcome the limitations associated with non-uniform distribution, weak biomolecule interaction, and ion leaching on surfaces. Modified surfaces employing APTES enhance ZIF-8 nucleation by generating a monolayer of self-assembled amine molecules. An in-situ growth approach is then used to produce evenly distributed ZIF-8 throughout it. In comparison with pristine fabric, this large amount of zinc obtained from the modification of the fabric has a higher affinity for interacting with membranes of microorganisms, leading to a 4.55-fold increase in coronavirus spike-glycoprotein immobilization. A series of binding ability stability tests on the surface demonstrate high efficiency of immobilization, >90%, of viruses and model proteins. The immobilization capacity of the modification fabric stayed unchanged after durability testing, demonstrating its durability and stability. It has also been found that this fabric surface modification approach has maintained air/vapor transmittance and air permeability levels comparable to pristine fabrics. These results strongly advocate this developed fabric has the potential for use as an outer layer of face masks or as a medical gown to prevent hospital-acquired infections.
病毒/细菌的爆发促使我们开发一种能够高效且长期稳定地抑制其传播的织物。通过在聚酯(PET)织物上创建富含金属离子的表面,发现了一种通过将微生物固定在其表面来抑制医院获得性感染的方法。利用ZIF-8和APTES来克服与表面分布不均匀、生物分子相互作用弱以及离子浸出相关的局限性。采用APTES的改性表面通过生成自组装胺分子单层来增强ZIF-8成核。然后采用原位生长方法在整个织物中均匀分布地生成ZIF-8。与原始织物相比,通过织物改性获得的大量锌对与微生物膜相互作用具有更高的亲和力,导致冠状病毒刺突糖蛋白固定量增加4.55倍。对表面进行的一系列结合能力稳定性测试表明,病毒和模型蛋白的固定效率很高,>90%。经过耐久性测试后,改性织物的固定能力保持不变,证明了其耐久性和稳定性。还发现这种织物表面改性方法保持了与原始织物相当的空气/蒸汽透过率和透气性水平。这些结果有力地表明,这种开发的织物有潜力用作口罩外层或医用防护服,以预防医院获得性感染。