State Grid Shandong Electric Power Research Institute, Jinan, China.
School of Energy and Power Engineering, Shandong University, Jinan, China.
J Environ Sci Health A Tox Hazard Subst Environ Eng. 2022;57(7):552-566. doi: 10.1080/10934529.2022.2083902. Epub 2022 Jun 7.
This article proposed an original comprehensive thermal treatment coupled with gasification and combustion (CGC) of oil sludge (OS), which was designed to produce hydrogen-rich syngas. Based on the experimental results of OS gasification with steam, the combustion characteristics of char from OS gasification were analyzed by thermogravimetric experiments under different heating rates of 10, 20 and 30 °C/min. The combustion process of OS gasification char can be divided into three stages, including water evaporation, volatile combustion and heavy component combustion. The average values of activation energy () obtained by Friedman, FWO and Starink methods were 89.98 kJ/mol, 147.61 kJ/mol and 143.09 kJ/mol, respectively. According to OS gasification and OS gasification char combustion experiments, the comprehensive thermal treatment process CGC of OS was simulated by Aspen Plus. The simulation results showed that increasing both gasification temperature and the mass ratio of steam to OS (SOS) could promote the hydrogen production. Considering energy consumption, the recommended OS gasification temperature, SOS and char combustion temperature were 800 ∼ 900 °C, 0.3 ∼ 0.5, and 900 ∼ 1000 °C, respectively, which could ensure full burning of char and reduce the generation of pollutants. The CGC process could reduce CO emissions by 44.2% from carbon flow analysis.
本文提出了一种原创的综合热解气化燃烧(CGC)工艺,用于处理含油污泥(OS),以生产富氢合成气。基于 OS 水蒸气气化的实验结果,通过在 10、20 和 30°C/min 三种不同升温速率下进行热重实验,分析了 OS 气化焦的燃烧特性。OS 气化焦的燃烧过程可分为三个阶段,包括水蒸发、挥发分燃烧和重质组分燃烧。Friedman、FWO 和 Starink 三种方法得到的平均活化能(Ea)分别为 89.98 kJ/mol、147.61 kJ/mol 和 143.09 kJ/mol。根据 OS 气化和 OS 气化焦燃烧实验,利用 Aspen Plus 对 OS 的综合热解气化燃烧(CGC)工艺进行了模拟。模拟结果表明,提高气化温度和水蒸气与 OS 的质量比(SOS)均可促进氢气生成。考虑到能耗,推荐的 OS 气化温度、SOS 和焦燃烧温度分别为 800900°C、0.30.5 和 900~1000°C,既能保证焦的完全燃烧,又能减少污染物的生成。从碳流分析来看,CGC 工艺可将 CO 排放量减少 44.2%。