A New Low-Temperature Solder Assembly Technique to Replace Eutectic Sn-Bi Solder Assembly.
作者信息
Sun Lingyao, Guo Zhenhua, Zhao Xiuchen, Liu Ying, Tu Kingning, Liu Yingxia
机构信息
School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081, China.
Department of Materials Science and Engineering, City University of Hong Kong, Hong Kong, China.
出版信息
Micromachines (Basel). 2022 May 31;13(6):867. doi: 10.3390/mi13060867.
We successfully achieved low-temperature assembly by reflowing the 13.5Sn-37.5Bi-45In-4Pb quaternary eutectic solder paste and the SAC 305 solder ball together at 140 °C for 5 min. The wetting angle of the mixed solder joint is 17.55°. The overall atomic percent of Pb in the mixed solder joint is less than 1%, which can be further reduced or eliminated. Moreover, after aging at 80 °C for 25 days, we observed no obvious decrease in shear strength of the fully mixed solder joint, which is the most advantage of this assembly technique over Sn58Bi solder assembly. The Bi phase segregation at the interface is slowed down compared with Sn-Bi solder joint. This low-temperature assembly is promising to be applied in advanced packaging technology to replace the eutectic Sn-Bi solder.
Zotero 插件