Experimental Investigation of Shale Tensile Failure under Thermally Conditioned Linear Fracturing Fluid (LFF) System and Reservoir Temperature Controlled Conditions.

Linear fracturing fluid (LFF) provides viscosity driven benefits of proppant suspensibility and fluid loss control, and with the use of a breaker agent, flowback recovery can be greatly enhanced. Shale tensile strength is critical in the prediction of fracture initiation and propagation, but its behavior under the interaction with LFF at reservoir temperature conditions remains poorly understood. This necessitated an in-depth investigation into the tensile strengths of Eagle Ford and Wolfcamp shales under thermally conditioned LFF and reservoir temperature controlled conditions. Brazilian Indirect Tensile Strength (BITS) testing was carried out for the quantitative evaluation of shale tensile strength, followed by extensive failure pattern classifications and surface crack length analysis. The thermally conditioned LFF saturation of shale samples led to average tensile strength (ATS) increases ranging from 26.33-51.33% for Wolfcamp. Then, for the Eagle Ford samples, ATS increases of 3.94 and 6.79% and decreases of 3.13 and 15.35% were recorded. The exposure of the samples to the temperature condition of 90 °C resulted in ATS increases of 24.46 and 33.78% for Eagle Ford and Wolfcamp shales, respectively. Then, for samples exposed to 220 °C, ATS decreases of 6.11 and 5.32% were respectively recorded for Eagle Ford and Wolfcamp shales. The experimental results of this research will facilitate models' development towards tensile strength predictions and failure pattern analysis and quantifications in the LFF driven hydraulic fracturing of shale gas reservoirs.