Illahi Usman, Iqbal Javed, Irfan Muhammad, Ismail Sulaiman Mohamad, Khan Muhammad Abbas, Rauf Abdul, Bari Inam, Abdullah Mujeeb, Muhammad Fazal, Nowakowski Grzegorz, Glowacz Adam
Electrical Engineering Department, FET, Gomal University, Dera Ismail Khan 29050, KP, Pakistan.
School of Electrical and Electronic Engineering, Engineering Campus, Universiti Sains Malaysia, Nibong Tebal 14300, Penang, Malaysia.
Sensors (Basel). 2022 Jul 25;22(15):5531. doi: 10.3390/s22155531.
In this article, a rectangular dielectric resonator antenna (RDRA) with circularly polarized (CP) response is presented for 5G NR (New Radio) Sub-6 GHz band applications. A uniquely shaped conformal metal feeding strip is proposed to excite the RDRA in higher-order mode for high gain utilization. By using the proposed feeding mechanism, the degenerate mode pair of the first higher-order, i.e., TEδ13x at 4.13 GHz and TE1δ3y, at 4.52 GHz is excited to achieve a circularly polarized response. A circular polarization over a bandwidth of ~10%, in conjunction with a wide impedance matching over a bandwidth of ~17%, were attained by the antenna. The CP antenna proposed offers a useful gain of ~6.2 dBic. The achieved CP bandwidth of the RDRA is good enough to cover the targeted 5G NR bands around 4.4−4.8 GHz, such as n79. The proposed antenna configuration is modelled and optimized using computer simulation technology (CST). A prototype was built to confirm (validate) the performance estimated through simulation. A good agreement was observed between simulated and measured results.
本文提出了一种用于5G新无线电(NR)低于6GHz频段应用的具有圆极化(CP)响应的矩形介质谐振器天线(RDRA)。提出了一种形状独特的共形金属馈电带,以高阶模式激励RDRA以实现高增益利用。通过使用所提出的馈电机制,激发了第一高阶简并模对,即4.13GHz的TEδ13x和4.52GHz的TE1δ3y,以实现圆极化响应。该天线实现了约10%带宽的圆极化以及约17%带宽的宽阻抗匹配。所提出的圆极化天线提供了约6.2dBic的有用增益。所实现的RDRA的圆极化带宽足以覆盖4.4−4.8GHz附近的目标5G NR频段,如n79。使用计算机仿真技术(CST)对所提出的天线配置进行建模和优化。制作了一个原型来确认(验证)通过仿真估计的性能。观察到仿真结果与测量结果之间有良好的一致性。