Jia Fei, Liu Cong, Yang Bo, Lee Alamusi, Wu Liangke, Ning Huiming
Department of Astronautical Science and Mechanics, Harbin Institute of Technology, Harbin 150001, China.
School of Manufacturing Science and Engineering, Southwest University of Science and Technology, Mianyang 621010, China.
Polymers (Basel). 2022 Aug 11;14(16):3273. doi: 10.3390/polym14163273.
In order to obtain high dielectric silicone rubber (SR)-based nanocomposites, graphene (Gr) was added by ultrasonication and mechanical mixing for the preparation of a microporous structure. It was discovered that the Gr content and the expansion rate had a great impact on the cellular structure. Based on the effects of the Gr content and the expansion rate on the dielectric property, hybrid materials were prepared and better properties appeared, as expected. For all samples, the dielectric constant increased with the Gr content until 3 wt% and then decreased. When the Gr content was 3 wt% and the expansion rate was 2, the dielectric constant reached 18.14 (1 kHz), which was 55% higher than that of the non-expansion sample (11.74) and several times that of the pure sample (3~6). Meanwhile, the dielectric loss was less than 0.01. This work proposed a method for producing high dielectric materials with important applications in the field of capacitors, sensors, and micro-resistors.
为了获得高介电常数的硅橡胶(SR)基纳米复合材料,通过超声处理和机械混合添加石墨烯(Gr)以制备微孔结构。发现Gr含量和膨胀率对泡孔结构有很大影响。基于Gr含量和膨胀率对介电性能的影响,制备了混合材料,并且如预期的那样出现了更好的性能。对于所有样品,介电常数随着Gr含量增加至3 wt%,然后下降。当Gr含量为3 wt%且膨胀率为2时,介电常数在1 kHz时达到18.14,比未膨胀样品(11.74)高55%,是纯样品(3~6)的几倍。同时,介电损耗小于0.01。这项工作提出了一种生产高介电材料的方法,该材料在电容器、传感器和微电阻器领域具有重要应用。