Suppr超能文献

外侧半月板同种异体移植中解剖标志与骨槽位置的相关性

Correlation Between Anatomic Landmarks and Bony Trough Position in Lateral Meniscal Allograft Transplant.

作者信息

Choi Nam-Hong, Yang Bong-Seok, Lee Dong-Min, Lee Jong-Seok, Victoroff Brian N

机构信息

Department of Orthopedic Surgery, Eulji Medical Center, Seoul, Republic of Korea.

Department of Orthopedic Surgery, Shihwa Medical Center, Siheung, Republic of Korea.

出版信息

Orthop J Sports Med. 2022 Aug 24;10(8):23259671221117531. doi: 10.1177/23259671221117531. eCollection 2022 Aug.

Abstract

BACKGROUND

Determining the rotational axis of the bony trough during lateral meniscal allograft transplant (MAT) is difficult. The use of anatomic landmarks may help a surgeon determine the rotational alignment of the graft during the procedure.

PURPOSE

To investigate the association between the knee's anatomic landmarks and the position of the bony trough to prevent extrusion after lateral MAT.

STUDY DESIGN

Cross-sectional study; Level of evidence, 3.

METHODS

Enrolled were 44 patients who underwent lateral MAT between July 2000 and February 2011. The patients' mean age at the time of surgery was 30.8 years. Extrusion was measured on magnetic resonance imaging (MRI) scans at a mean of 3.6 months postoperatively, and patients were divided into an extrusion group (n = 15) and a no-extrusion group (n = 29). Three coronal MRI scans from each patient were selected, each from the region at the level of the tibial tuberosity (TT), the anterior bony trough, and the posterior bony trough. We measured the distance between the center of the anterior bony trough and the center of the TT (the TT distance) and the distance between the center of the posterior bony trough and the medial border of the lateral femoral condyle (LFC) (the LFC distance).

RESULTS

The mean center of the anterior bony trough was in a more medial position relative to the center of the TT in the no-extrusion group (-2.9 ± 4.8 mm) compared with the extrusion group (1.3 ± 4.9 mm; = .010). The mean center of the posterior bony trough was in a more medial position relative to the medial border of the LFC in the no-extrusion group (-1.7 ± 3.9 mm) compared with the extrusion group (1.0 ± 3.2 mm; = .027). Both TT distance and LFC distance were significantly correlated with extrusion ( = .005 and .025, respectively). The cutoff value was -0.24 mm for the anterior bony trough and -0.58 mm for the posterior bony trough (negative values indicate that the trough was medial to the respective landmarks).

CONCLUSION

To prevent extrusion of the allograft, the center of the anterior bony trough needs to be aligned with the center of the TT, and the center of the posterior bony trough needs to be aligned with the medial border of the LFC.

摘要

背景

在外侧半月板同种异体移植(MAT)过程中,确定骨槽的旋转轴很困难。使用解剖标志可能有助于外科医生在手术过程中确定移植物的旋转对线。

目的

研究膝关节的解剖标志与骨槽位置之间的关联,以防止外侧MAT后移植物挤出。

研究设计

横断面研究;证据等级,3级。

方法

纳入2000年7月至2011年2月期间接受外侧MAT的44例患者。患者手术时的平均年龄为30.8岁。在术后平均3.6个月时通过磁共振成像(MRI)扫描测量移植物挤出情况,并将患者分为挤出组(n = 15)和无挤出组(n = 29)。从每位患者中选择三张冠状面MRI扫描图像,分别来自胫骨结节(TT)水平、前方骨槽和后方骨槽区域。我们测量了前方骨槽中心与TT中心之间的距离(TT距离)以及后方骨槽中心与外侧股骨髁(LFC)内侧缘之间的距离(LFC距离)。

结果

与挤出组(1.3±4.9 mm;P = 0.010)相比,无挤出组前方骨槽的平均中心相对于TT中心更偏内侧(-2.9±4.8 mm)。与挤出组(1.0±3.2 mm;P = 0.027)相比,无挤出组后方骨槽的平均中心相对于LFC内侧缘更偏内侧(-1.7±3.9 mm)。TT距离和LFC距离均与移植物挤出显著相关(分别为P = 0.005和0.025)。前方骨槽的截断值为-0.24 mm,后方骨槽的截断值为-0.58 mm(负值表示骨槽位于相应标志的内侧)。

结论

为防止同种异体移植物挤出,前方骨槽中心需要与TT中心对齐,后方骨槽中心需要与LFC内侧缘对齐。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/61fa/9425904/70c6fa92d55b/10.1177_23259671221117531-fig1.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验