Gao Tiantian, Brożek Jolanta, Dai Wu
Key Laboratory of Plant Protection Resources and Pest Integrated Management of the Ministry of Education, College of Plant Protection, Northwest A&F University, Yangling, Xianyang 712100, China.
Faculty of Natural Sciences, Institute of Biology, Biotechnology and Environmental Protection, University of Silesia, Bankowa 9, 40-007 Katowice, Poland.
Insects. 2022 Sep 16;13(9):843. doi: 10.3390/insects13090843.
Mouthparts are the crucial sensory and feeding organs associated with food detection and feeding in insects. The Asian ricaniid planthopper (Walker), recently introduced into Europe, can cause severe economic damage by sucking the phloem sap of tea, camphor, citrus, black locust and other plants using piercing-sucking mouthparts. To facilitate comprehensive understanding of feeding mechanisms in the Ricaniidae, the fine structure of the mouthparts of was observed by scanning electron microscopy for the first time. The mouthparts are tubular, consist of a cone-shaped labrum, with a wrinkled epidermis and without sensilla; the tubular labium is divided into three segments: a slender stylet fascicle consisting of two mandibular stylets with four ridged processes and a row of longitudinal striations on the distal part of the outer surface; and two maxillary stylets with a smooth and sharp distal part, interlocked to form a larger food canal and a smaller salivary canal. On the labium, 15 kinds of sensilla of different functions were recognized. Two rows of short sensilla basiconica (SB I) are symmetrically distributed along the labial groove on the first segment. Two pairs of long sensilla basiconica (SB II) (proprioceptors) are on both sides of the labial groove at the junction of the second and third segments. A placoid, flattened sensillum (SPF) is symmetrically located laterally on the proximal end of the last segment and several flattened sensilla campaniformia (SFC) were visible on the ventral side on the second and third segments. The distribution of four types (I-IV) of sensilla cheatica of different lengths on the dorsal surface of the labium is significantly denser than on the lateral and ventral surfaces. The labial apex is divided into dorsal and ventral sensory fields, mainly including uniporous long peg sensilla (I), as well as smaller peg sensilla (II) and nonporous peg sensilla (PGSN) on each dorsal field. These nonporous sensilla basiconica (BSN I and III) occur on the ventral sensory fields and are constant in number and distribution. The nonporous sensilla basiconica (BSN II) are symmetrically arranged near the opening of the stylet fascicle similarly to two oval multiporous plate sensilla (OPSM). The sensilla arrangement is slightly different from that observed in previously studied Fulgoromorpha using scanning electron micrographs, which may reflect differences in feeding preference or behavior.
口器是昆虫中与食物探测和取食相关的关键感觉和取食器官。最近引入欧洲的亚洲稻飞虱(Walker),会用刺吸式口器吸食茶树、樟树、柑橘树、刺槐等植物的韧皮部汁液,从而造成严重的经济损失。为了促进对稻飞虱科取食机制的全面理解,首次通过扫描电子显微镜观察了稻飞虱口器的精细结构。口器呈管状,由一个表皮有褶皱且无感器的锥形上唇组成;管状下唇分为三段:一段细长的口针束,由两根带有四条脊状突起的下颚口针组成,在外表面远端有一排纵向条纹;还有两根远端光滑尖锐的上颚口针,相互嵌合形成一个较大的食物管和一个较小的唾液管。在下唇上,识别出了15种不同功能的感器。两排短的锥形感器(SB I)沿第一段的唇沟对称分布。两对长的锥形感器(SB II)(本体感受器)位于第二段和第三段交界处唇沟的两侧。一个板状、扁平的感器(SPF)对称地位于最后一段近端的外侧,在第二段和第三段的腹侧可见几个扁平的钟形感器(SFC)。下唇背表面上四种不同长度的刺形感器(I-IV型)的分布明显比外侧和腹侧密集。唇尖分为背侧和腹侧感觉区,主要包括单孔长栓状感器(I),以及每个背侧感觉区较小的栓状感器(II)和无孔栓状感器(PGSN)。这些无孔锥形感器(BSN I和III)出现在腹侧感觉区,数量和分布恒定。无孔锥形感器(BSN II)与两个椭圆形多孔板感器(OPSM)类似,对称地排列在口针束开口附近。感器的排列与先前利用扫描电子显微镜研究的蜡蝉总科昆虫略有不同,这可能反映了取食偏好或行为上的差异。