Oral and Maxillo-Facial Surgery Department, Head and Neck Institute of Nice, University Hospital of Nice, 31 avenue de Valombrose, 06100, Nice, France.
Oral and Maxillo-Facial Surgery Department, Head and Neck Institute of Nice, University Hospital of Nice, 31 avenue de Valombrose, 06100, Nice, France.
J Stomatol Oral Maxillofac Surg. 2023 Feb;124(1S):101299. doi: 10.1016/j.jormas.2022.09.020. Epub 2022 Sep 29.
Mandibular anterior subapical osteotomy (MASO) is a complementary procedure during orthognathic surgery to correct proclination or extrusion of the anterior incisors when orthodontic movements fail. The increasing use of patient-specific implants (PSI, titanium plates) in orthognathic surgery has extended to this procedure. Digital orthognathic surgery planning involves manufacturing cutting/drilling guides and specific implants to provide better accuracy and allow complex movement with reduced surgical times compared to conventional planning. This study aimed to assess the accuracy of computer-aided surgery with patient-specific implants in mobilising the MASO segment according to planning.
Eleven consecutive patients with mean age 26.82 years (15-41, SD = 10.65) were treated with MASO in addition to other conventional orthognathic procedures incorporating digital planning and patient-specific implants. A three-dimensional "stl" format file of the mandibular dental arch was obtained using an intraoral scanner at the end of the surgical procedure. The accuracy of the MASO segment displacement imposed by PSI was assessed by comparing preoperative 3D-planned mandibular dental arch with the immediate postoperative 3D-measured arch, using surface superimposition and 7 standard dental landmarks. Deviations between the preoperative and postoperative landmarks were calculated and compared to determine whether MASO segment repositioning is sufficiently accurate to be safely used to reposition the incisor/canine axis.
Quantitative analysis revealed an absolute linear difference of 0.66 mm (SD = 0.51) between preoperative 3D digital dental arch impression and postoperative planned 3D dental arch. Overall, the median absolute discrepancies in the x-axis (right-left direction), y-axis (antero-posterior direction), and z-axis (supero-inferior direction) were respectively 0.56 mm (SD = 0.42), 0.77 mm (SD = 0.45) and 0.65 mm (SD = 0.61).
A high degree of accuracy between the virtual plan and the immediate postoperative result was observed. According to our results, PSI can be used safely with accuracy in MASO as an adjunct to other conventional orthognathic procedures.
下颌前根尖下截骨术(MASO)是正颌手术中的一种补充程序,用于矫正正畸治疗失败后前切牙的前倾或外突。在正颌手术中,越来越多地使用患者特异性植入物(PSI,钛板)已经扩展到了这个程序。数字化正颌手术计划包括制造切割/钻孔引导器和特定的植入物,以提供更好的准确性,并允许与传统计划相比,通过减少手术时间来实现更复杂的运动。本研究旨在评估计算机辅助手术中使用患者特异性植入物根据计划移动 MASO 段的准确性。
11 例连续患者,平均年龄 26.82 岁(15-41 岁,标准差=10.65),除了其他常规正颌手术外,还采用数字化计划和患者特异性植入物进行 MASO。手术结束时,使用口腔内扫描仪获得下颌牙弓的三维“stl”格式文件。通过表面叠加和 7 个标准牙标志,比较术前 3D 计划的下颌牙弓和即刻术后 3D 测量的牙弓,评估 PSI 对 MASO 段位移的准确性。计算术前和术后标志之间的偏差,以确定 MASO 段的重新定位是否足够准确,可以安全地用于重新定位切牙/尖牙轴。
定量分析显示,术前 3D 数字牙弓印象与术后计划的 3D 牙弓之间存在 0.66 毫米(标准差=0.51)的绝对线性差异。总体而言,x 轴(左右方向)、y 轴(前后方向)和 z 轴(上下方向)的中位数绝对差异分别为 0.56 毫米(标准差=0.42)、0.77 毫米(标准差=0.45)和 0.65 毫米(标准差=0.61)。
虚拟计划与即刻术后结果之间存在高度的准确性。根据我们的结果,PSI 可以安全地与准确性一起用于 MASO 作为其他常规正颌手术的辅助手段。