Department of Neurosurgery, Azienda Ospedaliero Universitaria di Sassari, Sassari, Italy.
Department of Neurosurgery, Azienda Ospedaliero Universitaria di Sassari, Sassari, Italy.
World Neurosurg. 2022 Dec;168:155-164. doi: 10.1016/j.wneu.2022.09.120. Epub 2022 Oct 4.
To assess utility and feasibility of a low-cost system to simulate clipping strategy for cerebral aneurysms using patient-specific surgically oriented three-dimensional (3D) computed tomography angiography with virtual craniotomy.
From 2017 to 2021, 53 consecutive patients scheduled for aneurysm clipping underwent preoperative planning using 3D computed tomography angiography with virtual craniotomy. The model was oriented in the surgical position to observe the anatomy through surgical corridors. Clipping was planned considering 3 parameters: shape of the clip, clip type (standard vs. fenestrated), and clipping strategy (simple vs. multiple). We used a scoring system (0-3) to assess the concordance of virtual planning with real surgery by assigning 1 point for each correctly predicted parameter. Qualitative assessment of 3D models was a secondary end point.
In 51 patients, 3D images perfectly matched the real anatomy shown in surgical videos. Concordance scores of 0, 1, 2, and 3 occurred with a frequency of 5%, 14%, 38%, and 43%, respectively. Concerning the shape of the clip, clip type, and clipping strategy, the concordance occurred in 73%, 80%, and 59%, respectively. Compared with simple clipping, strategies with multiple clippings were more difficult to predict correctly. Concordance scores of 0, 1, 2, and 3 occurred with a frequency of 5.7%, 5.7%, 31.4%, and 57.1%, respectively, in simple clipping and 4.8%, 28.6%, 47.6%, and 19%, respectively, in multiple clipping.
In our experience, use of 3D computed tomography angiography with virtual craniotomy is an easy and useful solution to plan clipping strategy. The surgeon's awareness of the surgical anatomy is improved. Although this method has some technical limitations, it represents a low-cost alternative if complex and expensive simulation systems are not available.
评估使用基于手术导向的三维(3D)计算机断层血管造影术结合虚拟开颅术模拟脑动脉瘤夹闭策略的低成本系统的实用性和可行性。
2017 年至 2021 年,53 例拟行动脉瘤夹闭术的连续患者接受了术前规划,使用 3D 计算机断层血管造影术结合虚拟开颅术。模型以手术位定向,通过手术通道观察解剖结构。夹闭时考虑了 3 个参数:夹的形状、夹的类型(标准型与开窗型)和夹闭策略(简单夹闭与多个夹闭)。我们使用评分系统(0-3 分)评估虚拟规划与真实手术的一致性,每个正确预测的参数得 1 分。3D 模型的定性评估是次要终点。
在 51 例患者中,3D 图像与手术视频中显示的真实解剖结构完全匹配。一致性评分 0、1、2 和 3 的出现频率分别为 5%、14%、38%和 43%。关于夹的形状、夹的类型和夹闭策略,一致性分别为 73%、80%和 59%。与简单夹闭相比,多个夹闭的策略更难准确预测。在简单夹闭中,一致性评分 0、1、2 和 3 的出现频率分别为 5.7%、5.7%、31.4%和 57.1%,而在多个夹闭中,一致性评分 0、1、2 和 3 的出现频率分别为 4.8%、28.6%、47.6%和 19%。
根据我们的经验,使用基于手术导向的三维计算机断层血管造影术结合虚拟开颅术是规划夹闭策略的一种简单而有用的方法。提高了术者对手术解剖结构的认识。尽管该方法存在一些技术局限性,但如果没有复杂和昂贵的模拟系统,它是一种低成本的替代方法。