Suppr超能文献

恒定磁场改性的环氧树脂基聚合物复合材料的物理化学和机械强度性能测试

Tests of Physicochemical and Mechanical Strength Properties of Polymer Composites on an Epoxy Resin Matrix, Modified by a Constant Magnetic Field.

作者信息

Miękoś Ewa, Cichomski Michał, Zieliński Marek, Klepka Tomasz, Sroczyński Dariusz, Fenyk Anna

机构信息

Department of Inorganic and Analytical Chemistry, Faculty of Chemistry, University of Lodz, Tamka 12, 91-403 Lodz, Poland.

Department of Materials Technology and Chemistry, Faculty of Chemistry, University of Lodz, Pomorska 163, 90-236 Lodz, Poland.

出版信息

Materials (Basel). 2022 Sep 28;15(19):6730. doi: 10.3390/ma15196730.

Abstract

The aim of the research presented in the paper was to obtain new polymer composites with strong functional properties on the Epidian 5 epoxy resin matrix. The polymer composites contained admixtures of expanded graphite, powder graphite, birch bark containing botulin, and yellow dextrin in set amounts of 20% by weight. Their various mechanical parameters and physicochemical properties were investigated. The research involved determining the effect of a constant magnetic field with magnetic induction B, under the influence of which the parameters and properties of polymer composites have been changed. For example, in a constant magnetic field with an induction of B = 0.5 T there was an increase in the hardness of the composite with an admixture of birch bark from 24.01 to 26.96 N/mm (12.3%), or in the composite with the addition of yellow dextrin from 26.12 to 29.93 N/mm (14.6%). It was also found, for example, that the water absorption of the resin itself decreased from 0.18% to 0.13%, and the composite with graphite powder from 0.48% to 0.46%. Changes in these parameters, often beneficial, may be important in terms of potential application of those new materials in industry as alternatives.

摘要

本文所展示的研究目的是在埃皮甸5环氧树脂基体上获得具有强大功能特性的新型聚合物复合材料。这些聚合物复合材料含有按重量计20%的膨胀石墨、粉末石墨、含肉毒杆菌的桦树皮和黄糊精的混合物。研究了它们的各种力学参数和物理化学性质。该研究涉及确定磁感应强度为B的恒定磁场的影响,在其影响下聚合物复合材料的参数和性质发生了变化。例如,在磁感应强度B = 0.5 T的恒定磁场中,含有桦树皮混合物的复合材料硬度从24.01 N/mm增加到26.96 N/mm(增加了12.3%),或者添加了黄糊精的复合材料硬度从26.12 N/mm增加到29.93 N/mm(增加了14.6%)。例如,还发现树脂本身的吸水率从0.18%降至0.13%,含石墨粉的复合材料吸水率从0.48%降至0.46%。这些参数的变化通常是有益的,就这些新材料作为替代品在工业中的潜在应用而言可能很重要。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/672f/9571060/265e95272345/materials-15-06730-g001.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验