Graduate School of Engineering Science, Osaka University, Toyonaka 560-8531, Osaka, Japan.
Graduate School of Information Sciences, Hiroshima City University, Hiroshima 731-3194, Hiroshima, Japan.
Sensors (Basel). 2022 Sep 29;22(19):7412. doi: 10.3390/s22197412.
(1) Background: A mouth-free interface is required for functional electrical stimulation (FES) in people with spinal cord injuries. We developed a novel system for clenching the human metacarpophalangeal (MP) joint using an earphone-type ear canal movement sensor. Experiments to control joint angle and joint stiffness were performed using the developed system. (2) Methods: The proposed FES used an equilibrium point control signal and stiffness control signal: electrical agonist-antagonist ratio and electrical agonist-antagonist sum. An angle sensor was used to acquire the joint angle, and system identification was utilized to measure joint stiffness using the external force of a robot arm. Each experiment included six and five subjects, respectively. (3) Results: While the joint angle could be controlled well by clenching with some hysteresis and delay in three subjects, it could not be controlled relatively well after hyperextension in the other subjects, which revealed a calibration problem and a change in the characteristics of the human MP joint caused by hyperextension. The joint stiffness increased with the clenching amplitude in five subjects. In addition, the results indicated that viscosity can be controlled. (4) Conclusions: The developed system can control joint angle and stiffness. In future research, we will develop a method to show that this system can control the equilibrium point and stiffness simultaneously.
(1)背景:对于脊髓损伤患者,功能性电刺激(FES)需要一种无需使用口腔的接口。我们开发了一种新型系统,该系统使用耳机式耳道运动传感器来握紧人类掌指(MP)关节。使用开发的系统进行了控制关节角度和关节刚度的实验。(2)方法:所提出的 FES 使用平衡点控制信号和刚度控制信号:电激动剂拮抗剂比和电激动剂拮抗剂总和。使用角度传感器获取关节角度,并使用机器人臂的外力通过系统识别来测量关节刚度。每个实验分别包括六名和五名受试者。(3)结果:在三个受试者中,通过紧握可以很好地控制关节角度,但在其他受试者中,在过度伸展后,关节角度无法相对较好地控制,这揭示了校准问题以及人类 MP 关节的特性变化过度伸展。在五名受试者中,关节刚度随紧握幅度的增加而增加。此外,结果表明可以控制粘性。(4)结论:开发的系统可以控制关节角度和刚度。在未来的研究中,我们将开发一种方法来证明该系统可以同时控制平衡点和刚度。