Interdisciplinary Center for Transfer-oriented Research in Natural Sciences, Martin Luther University Halle-Wittenberg, 06099, Halle/Saale, Germany.
Institute of Physics, Martin Luther University Halle-Wittenberg, 06099, Halle/Saale, Germany.
J Mech Behav Biomed Mater. 2023 Jan;137:105546. doi: 10.1016/j.jmbbm.2022.105546. Epub 2022 Nov 5.
Young's modulus of α'- and α-crystals of poly (l-lactic acid) (PLLA), more precisely, of aggregates of isotropically arranged lamellae, has been estimated based on dynamic-mechanical analysis of sets of isotropic film samples containing largely different though well-defined amounts of crystals. Evaluation of the modulus of elasticity of these film samples yielded the dependence of Young's modulus as a function of the enthalpy-based crystallinity, increasing with the crystal fraction in the assessed range, from zero to about 75% crystallinity. Extrapolation towards 100% crystallinity suggests values of Young's modulus of around 3.7 and 4.6 GPa for isotropic aggregates of α'- and α-crystals, respectively, being only slightly higher than the modulus of the unaged glassy amorphous phase of 3.0 GPa. Noting the inherent anisotropy of the crystal modulus, suggested in the literature, the average modulus determined in this work seems to be controlled by weaker interchain secondary bonding but not the modulus in chain direction. Great effort has been undertaken to minimize errors by keeping the lamellar thickness in samples of different crystallinity constant, and by providing evidence for independence of the moduli on the spherulitic superstructure.
聚(L-乳酸)(PLLA)的 α'-和 α-晶体的杨氏模量,更准确地说,是各向同性排列的片晶聚集体的杨氏模量,是基于一系列各向同性薄膜样品的动态力学分析来估计的,这些样品包含了大量不同但定义明确的晶体。评估这些薄膜样品的弹性模量得到了杨氏模量作为基于焓的结晶度的函数的依赖性,在评估的范围内,杨氏模量随晶体分数的增加而增加,从零到约 75%的结晶度。向 100%结晶度的外推表明,各向同性的 α'-和 α-晶体聚集体的杨氏模量分别约为 3.7 和 4.6 GPa,略高于未老化的玻璃态非晶相的模量 3.0 GPa。考虑到文献中建议的晶体模量的固有各向异性,本工作中确定的平均模量似乎由较弱的链间次级键控制,而不是链方向的模量。通过保持不同结晶度样品中的片层厚度不变,并提供对模量与球晶超结构无关的证据,我们做出了很大的努力来最小化误差。