Suppr超能文献

通过基于双膦酸盐的配位配合物的表面结晶对二氧化钛进行功能化。

Functionalization of Titanium Dioxide by Surface Crystallization of Bisphosphonate-Based Coordination Complexes.

机构信息

Department of Chemistry, University of Puerto Rico, Río Piedras, San Juan, Puerto Rico00931, United States.

Crystallization Design Institute, Molecular Sciences Research Center, University of Puerto Rico, San Juan, Puerto Rico00926, United States.

出版信息

Inorg Chem. 2023 Jan 9;62(1):201-212. doi: 10.1021/acs.inorgchem.2c03203. Epub 2022 Dec 22.

Abstract

Functionalization of highly pure rutile phase titanium dioxide (TiO) particles with a selected bisphosphonate-based coordination complex (BPCC), ZOLE-Ca form II, was achieved through in situ surface crystallization. The hydrothermal reaction of the selected BPCC was carried out in the presence of photoactivated rutile phase TiO by ultraviolet irradiation. The reaction time was varied to control the crystal growth of the BPCC around the TiO core, resulting in a functionalized material with different shell thicknesses: TiO-core:ZOLE-shell-† (5 min) and TiO-core:Ca@ZOLE-shell-‡ (10 min). The crystal phase assessment of the BPCC and the polymorphic phase purity of the metal oxide were determined after immobilization through Raman spectroscopy and powder X-ray diffraction. The results initially suggested that the crystallization of a shell comprising the selected BPCC surrounding a highly pure rutile phase TiO core was achieved through controlled in situ surface crystallization. Morphological changes, elemental composition and exact atomic distribution in the functionalized materials were addressed employing scanning electron microscopy coupled with energy-dispersive spectroscopy. These analyses unambiguously confirmed that after 5 min, successful incorporation of a thin BPCC shell on the surface of the metal oxide particles was achieved. Particle size distribution measurements revealed an average particle size of 495 d.nm for the functionalized material after the immobilization process. Quantitative determination of the BPCC shell content in TiO-core:Ca@ZOLE-shell-† was determined through thermogravimetric analysis, estimating a ratio of ∼1:3 (TiO:BPCC). The cytotoxicity of TiO-core:Ca@ZOLE-shell-† against MDA-MB-231 (cancer cell model) and hFOB 1.19 (normal osteoblast-like cell model) cell lines was investigated. The results demonstrated significant cell growth inhibition for TiO-core:Ca@ZOLE-shell-† against MDA-MB-231, specifically at a concentration of 7.5 μM (% RCL = 46 ± 2%, 72 h). Under the same conditions, the functionalized material did not present cytotoxicity against hFOB 1.19 (% RCL ∼ 100%). These important outcomes provide evidence of the surface crystallization of BPCCs onto rutile phase TiO for the development of a novel functionalized material with the potential to treat and prevent osteolytic metastases.

摘要

通过原位表面结晶的方法,将高度纯的锐钛矿相二氧化钛(TiO)颗粒功能化,得到一种基于双膦酸盐的配位化合物(BPCC),ZOLE-Ca 形式 II。选择的 BPCC 水热反应在紫外光照射下于光激活的锐钛矿相 TiO 存在下进行。通过改变反应时间来控制 BPCC 在 TiO 核周围的晶体生长,从而得到具有不同壳层厚度的功能化材料:TiO 核:ZOLE 壳-†(5 分钟)和 TiO 核:Ca@ZOLE 壳-‡(10 分钟)。通过拉曼光谱和粉末 X 射线衍射法确定 BPCC 的晶体相评估和金属氧化物的多晶相纯度。结果表明,通过控制原位表面结晶,实现了由所选 BPCC 组成的壳层围绕高度纯锐钛矿相 TiO 核的结晶。采用扫描电子显微镜结合能量色散光谱法研究了功能化材料的形貌变化、元素组成和精确原子分布。这些分析明确证实,经过 5 分钟后,成功地在金属氧化物颗粒表面上引入了一层薄的 BPCC 壳。在固定化过程后,通过粒度分布测量法得到功能化材料的平均粒径为 495 d.nm。通过热重分析定量测定 TiO-core:Ca@ZOLE-shell-† 中 BPCC 壳的含量,估计比值约为 1:3(TiO:BPCC)。研究了 TiO-core:Ca@ZOLE-shell-† 对 MDA-MB-231(癌细胞模型)和 hFOB 1.19(正常成骨样细胞模型)细胞系的细胞毒性。结果表明,TiO-core:Ca@ZOLE-shell-† 对 MDA-MB-231 的细胞生长抑制作用显著,特别是在 7.5 μM 浓度下(% RCL = 46 ± 2%,72 h)。在相同条件下,功能化材料对 hFOB 1.19 没有细胞毒性(% RCL ∼ 100%)。这些重要结果为 BPCCs 在锐钛矿相 TiO 上的表面结晶提供了证据,为开发一种具有治疗和预防溶骨性转移的新型功能化材料提供了可能。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验