Sanchez-Salvador Jose Luis, Marques Mariana P, Brito Margarida S C A, Negro Carlos, Monte Maria Concepcion, Manrique Yaidelin A, Santos Ricardo J, Blanco Angeles
Department of Chemical Engineering and Materials, University Complutense of Madrid, Avda. Complutense s/n, 28040 Madrid, Spain.
Laboratory of Separation and Reaction Engineering-Laboratory of Catalysis and Materials (LSRE-LCM), Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal.
Nanomaterials (Basel). 2022 Dec 19;12(24):4499. doi: 10.3390/nano12244499.
Vegetable supply in the world is more than double than vegetable intake, which supposes a significant waste of vegetables, in addition to the agricultural residues produced. As sensitive food products, the reasons for this waste vary from the use of only a part of the vegetable due to its different properties to the product appearance and market image. An alternative high-added-value application for these wastes rich in cellulose could be the reduction in size to produce lignocellulose micro- and nanofibrils (LCMNF). In this sense, a direct treatment of greengrocery waste (leek, lettuce, and artichoke) to produce LCMNFs without the extraction of cellulose has been studied, obtaining highly concentrated suspensions, without using chemicals. After drying the wastes, these suspensions were produced by milling and blending at high shear followed by several passes in the high-pressure homogenizer (up to six passes). The presence of more extractives and shorter fiber lengths allowed the obtention of 5-5.5% leek LCMNF suspensions and 3.5-4% lettuce LCMNF suspensions, whereas for artichoke, only suspensions of under 1% were obtained. The main novelty of the work was the obtention of a high concentration of micro- and nanofiber suspension from the total waste without any pretreatment. These high concentrations are not obtained from other raw materials (wood or annual plants) due to the clogging of the homogenizer, requiring the dilution of the sample up to 1% or the use of chemical pretreatments.
世界蔬菜供应量比蔬菜摄入量多一倍以上,这意味着除了产生农业残余物外,还存在大量蔬菜浪费。作为敏感食品,造成这种浪费的原因多种多样,从因蔬菜不同特性而只使用其一部分,到产品外观和市场形象等方面。对于这些富含纤维素的废弃物,一种高附加值的应用途径可能是将其粉碎以生产木质纤维素微纤丝和纳米纤丝(LCMNF)。从这个意义上讲,已经研究了对蔬菜水果废弃物(韭菜、生菜和洋蓟)进行直接处理以在不提取纤维素的情况下生产LCMNF,从而在不使用化学物质的情况下获得高浓度悬浮液。将废弃物干燥后,通过高剪切研磨和混合,然后在高压均质机中经过多次(多达六次)处理来制备这些悬浮液。由于含有更多的提取物和较短的纤维长度,可获得5 - 5.5%的韭菜LCMNF悬浮液和3.5 - 4%的生菜LCMNF悬浮液,而对于洋蓟,仅获得浓度低于1%的悬浮液。这项工作的主要新颖之处在于无需任何预处理就能从全部废弃物中获得高浓度的微纤丝和纳米纤丝悬浮液。由于均质机堵塞,从其他原材料(木材或一年生植物)无法获得这些高浓度悬浮液,这需要将样品稀释至1%或使用化学预处理。