Li Kang, Cao Xiaoping, Wang Jian
Opt Express. 2022 Dec 19;30(26):47249-47263. doi: 10.1364/OE.472768.
Mode-division multiplexing (MDM) has been extensively utilized to expand the capacity of chip-scale or fiber-based optical communication, whereas it is still challenging to implement the MDM for fiber-chip optical interconnects due to the huge mode mismatch between few-mode fiber (FMF) and multi-mode waveguide. In this work, we propose and design a silicon integrated six-mode edge coupler assisted with a slot waveguide, which achieves the efficient direct conversion of multiple modes between the waveguide and fiber in a broad bandwidth. Based on the principle of mode conversion, this edge coupler enables the mode conversion between six linear polarization (LP) modes (i.e. LPx/y01, LPx/y11a, LPx/y11b) in FMF and six on-chip waveguide modes (i.e. TE, TE, TE, TM, TM, TM) with low insertion loss, low mode crosstalk and broad bandwidth. The obtained results show that over the whole C-band the efficiency of mode conversion is higher than 98% and the mode crosstalk is low than -19 dB, while the total coupling loss is higher than 85%. The favorable results offer an important reference for designing related broadband photonic devices, and the presented scheme could be potentially exploited to further increase the transmission capability for prospective fiber-chip optical interconnections and communications.
模式分割复用(MDM)已被广泛用于扩展芯片级或基于光纤的光通信容量,然而,由于少模光纤(FMF)与多模波导之间存在巨大的模式失配,实现用于光纤 - 芯片光互连的MDM仍然具有挑战性。在这项工作中,我们提出并设计了一种带有槽波导辅助的硅集成六模边缘耦合器,它在很宽的带宽内实现了波导和光纤之间多种模式的高效直接转换。基于模式转换原理,这种边缘耦合器能够实现FMF中的六种线性偏振(LP)模式(即LPx/y01、LPx/y11a、LPx/y11b)与六种片上波导模式(即TE、TE、TE、TM、TM、TM)之间的模式转换,具有低插入损耗、低模式串扰和宽带宽。所得结果表明,在整个C波段,模式转换效率高于98%,模式串扰低于 -19 dB,而总耦合损耗高于85%。这些良好的结果为设计相关宽带光子器件提供了重要参考,并且所提出的方案有可能被用于进一步提高未来光纤 - 芯片光互连和通信的传输能力。