Xiong Jianhua, Wei Xiangting, Shen Xiantao, Zhu Weiwei, Yi Shaohua, Huang Chuixiu
Department of Forensic Medicine, Huazhong University of Science and Technology, Hangkong Road #13, Wuhan, Hubei 430030, China.
State Key Laboratory of Environment Health (Incubation), Key Laboratory of Environment and Health, Ministry of Education, Key Laboratory of Environment and Health (Wuhan), Ministry of Environmental Protection, School of Public Health, Tongji Medical College, Huazhong University of Science and Technology, #13 Hangkong Road, Wuhan, Hubei, 430030, China.
J Chromatogr A. 2023 Jan 11;1688:463738. doi: 10.1016/j.chroma.2022.463738. Epub 2022 Dec 21.
Determination of amphetamine-type drugs (ATSs) in urine and wastewater is a simplified approach for the widespread monitoring of ATSs abuse. To improve the sensitivity of the analytical methods, molecularly imprinted polymers (MIPs) based solid-phase extraction (SPE) pretreatment attracted great attention in this field. Generally, smaller particle sizes and more uniform morphology of the MIPs could provide higher detection sensitivity. Our previous works showed reflux precipitation polymerization (RPP) is a method for synthesizing monodispersed MIPs with small particle size. However, synthesis of uniform spherical MIPs towards a group of targets has never been reported. Therefore, in the present work, MIPs towards a group of ATSs were synthesized via RPP with a pseudo template for the first time. After screening potential pseudo-templates, N-methylphenylethylamine (MPEA) was selected as the optimal pseudo-template. MPEA-MIPs were characterized by scanning electron microscope (SEM), FT-IR spectroscopy and X-ray photoelectron spectroscopy (XPS) spectra. Adsorption isotherms, adsorption kinetics and selectivity were evaluated, and the experimental results indicated that the MPEA-MIPs possessed good selectivity and adsorption property towards ATSs. After optimization of the MIP-SPE procedure, the MIP-SPE cartridges were then coupled with liquid chromatography and tandem mass spectrometry (LC-MS/MS) for determination of ATSs. The evaluation results showed that MIP-SPE-LC-MS/MS displayed good linearity (R >0.991) in the linear range (1.0-50.0 µg/L for urine and 0.5-50.0 µg/L for wastewater), and low matrix effect (85-112%). The limit of detection (LOD) was 0.05 -0.29 µg/L, and the accuracy (85-115%) and repeatability (RSD ≤ 15%) were satisfactory at low, medium and high concentrations. To the best of our knowledge, this is the first time that dummy MIPs towards a group of ATSs were synthesized by RPP polymerization, which showed great potential for the detection of ATSs in urine and wastewater.
尿液和废水中苯丙胺类药物(ATSs)的测定是广泛监测ATSs滥用情况的一种简化方法。为提高分析方法的灵敏度,基于分子印迹聚合物(MIPs)的固相萃取(SPE)预处理在该领域备受关注。一般来说,MIPs较小的粒径和更均匀的形态能够提供更高的检测灵敏度。我们之前的工作表明,回流沉淀聚合(RPP)是一种合成小粒径单分散MIPs的方法。然而,从未有过针对一组目标物合成均匀球形MIPs的报道。因此,在本工作中,首次通过RPP使用伪模板合成了针对一组ATSs的MIPs。在筛选潜在的伪模板后,选择N-甲基苯乙胺(MPEA)作为最佳伪模板。通过扫描电子显微镜(SEM)、傅里叶变换红外光谱(FT-IR)和X射线光电子能谱(XPS)对MPEA-MIPs进行了表征。评估了吸附等温线、吸附动力学和选择性,实验结果表明MPEA-MIPs对ATSs具有良好的选择性和吸附性能。在优化MIP-SPE程序后,将MIP-SPE小柱与液相色谱-串联质谱(LC-MS/MS)联用测定ATSs。评估结果表明,MIP-SPE-LC-MS/MS在尿液线性范围(1.0 - 50.0 μg/L)和废水线性范围(0.5 - 50.0 μg/L)内显示出良好的线性(R > 0.991),且基质效应低(85 - 112%)。检测限(LOD)为0.05 - 0.29 μg/L,在低、中、高浓度下的准确度(85 - 115%)和重复性(RSD≤15%)令人满意。据我们所知,这是首次通过RPP聚合合成针对一组ATSs的虚拟MIPs,其在尿液和废水中ATSs的检测方面显示出巨大潜力。