Staszak Katarzyna, Kruszelnicka Izabela, Ginter-Kramarczyk Dobrochna, Góra Wojciech, Baraniak Marek, Lota Grzegorz, Regel-Rosocka Magdalena
Institute of Chemical Technology and Engineering, Faculty of Chemical Technology, Poznan University of Technology, ul. Berdychowo 4, 60-965 Poznan, Poland.
Department of Water Supply and Bioeconomy, Faculty of Environmental Engineering and Energy, Poznan University of Technology, ul. Berdychowo 4, 60-965 Poznan, Poland.
Materials (Basel). 2022 Dec 30;16(1):378. doi: 10.3390/ma16010378.
The review presents advances in the removal of Cr(III) from the industrial effluents published in the last ten years. Although Cr(III) has low solubility and is less dangerous for the aquatic environment than Cr(VI), it cannot be released into the aquatic environment without limitations and its content in water should be restricted. The development of efficient techniques for the removal of Cr(III) is also a response to the problem of chromium wastewater containing Cr(VI) ions. Very often the first step in dealing with such wastewater is the reduction in chromium content. In some cases, removal of Cr(III) from wastewaters is an important step for pretreatment of solutions to prepare them for subsequent recovery of other metals. In the review, hydrometallurgical operations for Cr(III) removal are presented, including examples of Cr(III) recovery from real industrial effluents with precipitation, adsorption, ion exchange, extraction, membrane techniques, microbial-enhanced techniques, electrochemical methods. The advantages and disadvantages of the operations mentioned are also presented. Finally, perspectives for the future in line with circular economy and low-environmental impact are briefly discussed.
本综述介绍了过去十年中发表的有关从工业废水中去除Cr(III)的研究进展。尽管Cr(III)的溶解度较低,对水生环境的危害比Cr(VI)小,但也不能无限制地排放到水生环境中,其在水中的含量应受到限制。开发高效去除Cr(III)的技术也是应对含Cr(VI)离子的铬废水问题的一种方式。处理此类废水时,第一步通常是降低铬含量。在某些情况下,从废水中去除Cr(III)是溶液预处理的重要步骤,以便为后续回收其他金属做准备。本综述介绍了用于去除Cr(III)的湿法冶金操作,包括通过沉淀、吸附、离子交换、萃取、膜技术、微生物强化技术、电化学方法从实际工业废水中回收Cr(III)的实例。还介绍了上述操作的优缺点。最后,简要讨论了符合循环经济和低环境影响的未来发展前景。