Ślęzak-Prochazka Izabella, Batko Kornelia M, Ślęzak Andrzej
Biotechnology Centre, Silesian University of Technology, Akademicka 2A, 44-100 Gliwice, Poland.
Institute of Political Science, Faculty of Social Sciences, University of Silesia, Bankowa 12, 40-007 Katowice, Poland.
Entropy (Basel). 2022 Dec 20;25(1):3. doi: 10.3390/e25010003.
We evaluated the transport properties of a bacterial cellulose (BC) membrane for aqueous ethanol solutions. Using the version of the Kedem-Katchalsky-Peusner formalism (KKP) for the concentration polarization (CP) conditions of solutions, the osmotic and diffusion fluxes as well as the membrane transport parameters were determined, such as the hydraulic permeability (), reflection (σ), and solute permeability (ω). We used these parameters and the Peusner (Rijr) coefficients resulting from the KKP equations to assess the transport properties of the membrane based on the calculated dependence of the concentration coefficients: the resistance, coupling, and energy conversion efficiency for aqueous ethanol solutions. The transport properties of the membrane depended on the hydrodynamic conditions of the osmotic diffusion transport. The resistance coefficients R11r, R22r, and Rdetr were positive and higher, and the R12r coefficient was negative and lower under CP conditions (higher in convective than nonconvective states). The energy conversion was evaluated and fluxes were calculated for the -, -, and -energy. It was found that the energy conversion was greater and the -energy and -energy were lower under CP conditions. The convection effect was negative, which means that convection movements were directed vertically upwards. Understanding the membrane transport properties and mechanisms could help to develop and improve the membrane technologies and techniques used in medicine and in water and wastewater treatment processes.
我们评估了细菌纤维素(BC)膜对乙醇水溶液的传输特性。使用适用于溶液浓度极化(CP)条件的Kedem-Katchalsky-Peusner形式(KKP)版本,确定了渗透通量和扩散通量以及膜传输参数,如水力渗透率()、反射系数(σ)和溶质渗透率(ω)。我们使用这些参数以及KKP方程得出的Peusner(Rijr)系数,基于计算出的浓度系数依赖性来评估膜的传输特性:乙醇水溶液的阻力、耦合和能量转换效率。膜的传输特性取决于渗透扩散传输的流体动力学条件。在CP条件下(对流状态下比非对流状态下更高),阻力系数R11r、R22r和Rdetr为正值且更高,而R12r系数为负值且更低。对 - 、 - 和 - 能量进行了能量转换评估并计算了通量。结果发现,在CP条件下能量转换更大, - 能量和 - 能量更低。对流效应为负,这意味着对流运动方向垂直向上。了解膜的传输特性和机制有助于开发和改进医学以及水和废水处理过程中使用的膜技术和工艺。