Albergamo Vittorio, Wohlleben Wendel, Plata Desirée L
Department of Civil and Environmental Engineering, Massachusetts Institute of Technology, 15 Vassar Street, Cambridge, Massachusetts 02139, USA.
Department of Material Physics and Analytics, Advanced Materials Research, BASF SE, Carl-Bosch-Str. 38, 67056 Ludwigshafen, Germany.
Environ Sci Process Impacts. 2023 Mar 22;25(3):432-444. doi: 10.1039/d2em00415a.
Sunlight exposure can naturally mitigate microplastics pollution in the surface ocean, however it results in emissions of dissolved organic carbon (DOC) whose characteristics and fate remain largely unknown. In this work, we investigated the effects of solar radiation on polyether (TPU_Ether) and polyester (TPU_Ester) thermoplastic polyurethane, and on a thermoset polyurethane (PU_Hardened). The microplastics were irradiated with simulated solar light with a UV dose of 350 MJ m, which corresponds to roughly 15 months outdoor exposure at 31° N latitude. The particles were characterized using ATR-FTIR and elemental analysis. The DOC released to the aqueous phase was quantified by total organic carbon analysis and characterized by nontarget liquid chromatography coupled to high-resolution mass spectrometry. Polyurethane microplastics were degraded following mechanisms reconcilable with UV photo-oxidation. The carbon mass fraction released to the aqueous phase was 8.5 ± 0.5%, 3.7 ± 0.2%, and 2.8 ± 0.2% for TPU_Ether, TPU_Ester, and PU_Hardened, respectively. The corresponding DOC release rates, expressed as mg carbon per UV dose were 0.023, 0.013, and 0.010 mg MJ for TPU_Ether, TPU_Ester and PU_Hardened, respectively. Roughly three thousand unique by-products were released from photo-weathered TPUs, whereas 540 were detected in the DOC of PU_Hardened. This carbon pool was highly complex and dynamic in terms of physicochemical properties and susceptibility to further photodegradation after dissolution from the particles. Our results show that plastics photodegradation in the ocean requires chemical assessment of the DOC emissions in addition to the analysis of aged microplastics and that polymer chemistry influences the chain scission products.
阳光照射可自然减轻海洋表层的微塑料污染,然而这会导致溶解有机碳(DOC)的排放,其特性和归宿在很大程度上仍不为人知。在这项工作中,我们研究了太阳辐射对聚醚(TPU_Ether)和聚酯(TPU_Ester)热塑性聚氨酯以及热固性聚氨酯(PU_Hardened)的影响。用紫外线剂量为350兆焦耳/平方米的模拟太阳光照射微塑料,这大致相当于在北纬31°户外暴露15个月。使用衰减全反射傅里叶变换红外光谱(ATR-FTIR)和元素分析对颗粒进行表征。通过总有机碳分析对释放到水相中的DOC进行定量,并通过非靶向液相色谱与高分辨率质谱联用进行表征。聚氨酯微塑料按照与紫外光光氧化相符的机制发生降解。释放到水相中的碳质量分数,TPU_Ether、TPU_Ester和PU_Hardened分别为8.5±0.5%、3.7±0.2%和2.8±0.2%。相应的DOC释放速率,以每紫外线剂量毫克碳表示,TPU_Ether、TPU_Ester和PU_Hardened分别为0.023、0.013和0.010毫克/兆焦耳。光老化的热塑性聚氨酯释放出大约三千种独特的副产物,而在PU_Hardened的DOC中检测到540种。这个碳库在物理化学性质以及从颗粒溶解后对进一步光降解的敏感性方面高度复杂且动态变化。我们的结果表明,海洋中塑料的光降解除了对老化微塑料进行分析外,还需要对DOC排放进行化学评估,并且聚合物化学会影响断链产物。