University of Wisconsin-Madison Department of Mechanical Engineering, Room 3034, Mechanical Engineering Building, 1513 University Ave., Madison, WI 53706-1539, United States.
University of Wisconsin-Madison Department of Mechanical Engineering, Room 3039, Mechanical Engineering Building, 1513 University Ave., Madison, WI 53706-1539, United States.
J Biomech. 2023 Jan;147:111436. doi: 10.1016/j.jbiomech.2023.111436. Epub 2023 Jan 13.
This paper presents the effectsof the Variable Stiffness Foot (VSF) on lower-limb joint mechanics in level-ground walking. Persons with transtibial amputations use lower-limb prostheses to restore level-ground walking, and foot stiffness and geometry have been shown to be the main factors for evaluating foot prostheses. Previous studies have validated the semi-active and stiffness modulation capabilities of the VSF. The core aim of this study is to investigate the mechanical effects of adjusting stiffness on knee and ankle mechanics for prosthetic users wearing the VSF. For this study, seven human participants walked with three different stiffnesses (compliant, medium, stiff) of the VSF across two force plates in a motion capture lab. Linear mixed models were utilized to estimate the significance and coefficients of determinations for the regression of stiffness on several biomechanical metrics. A stiffer VSF led to decreased ankle dorsiflexion angle (p < 0.0001, r = 0.90), increased ankle plantarflexor moment (p = 0.016, r = 0.40), increased knee extension (p = 0.021, r = 0.37), increased knee flexor moment (p = 0.0007, r = 0.63), and decreased magnitudes of prosthetic energy storage (p < 0.0001, r = 0.90), energy return (p = 0.0003, r = 0.67), and power (p < 0.0001, r = 0.74). These results imply lower ankle, knee, and hip moments, and more ankle angle range of motion using a less stiff VSF, which may be advantageous to persons walking with lower-limb prostheses. Responsive modulation of the VSF stiffness, according to these findings, could help overcome gait deviations associated with different slopes, terrain characteristics, or footwear.
本文研究了可变刚度脚(VSF)对水平地面行走时下肢关节力学的影响。小腿截肢者使用下肢假肢来恢复水平地面行走,而脚的刚度和几何形状已被证明是评估假肢的主要因素。先前的研究已经验证了 VSF 的半主动和刚度调节能力。本研究的核心目的是研究调整刚度对佩戴 VSF 的假肢使用者膝关节和踝关节力学的机械影响。为此,在运动捕捉实验室中,七名人类参与者使用 VSF 的三种不同刚度(顺应性、中、硬)在两个测力板上行走。线性混合模型用于估计刚度对几个生物力学指标的回归的显著性和确定系数。更硬的 VSF 导致踝关节背屈角度减小(p<0.0001,r=0.90),踝关节跖屈肌力矩增加(p=0.016,r=0.40),膝关节伸展增加(p=0.021,r=0.37),膝关节屈肌力矩增加(p=0.0007,r=0.63),以及减少假肢储能(p<0.0001,r=0.90)、能量回收(p=0.0003,r=0.67)和功率(p<0.0001,r=0.74)的幅度。这些结果表明,使用刚度较小的 VSF,踝关节、膝关节和髋关节的力矩更小,踝关节的活动范围更大,这可能对使用下肢假肢行走的人有利。根据这些发现,VSF 刚度的响应式调节可能有助于克服与不同坡度、地形特征或鞋类相关的步态偏差。