Department of Medical Physics, Faculty of Medical Sciences, Tarbiat Modares University, Tehran, Iran.
Skin Res Technol. 2023 Jan;29(1):e13280. doi: 10.1111/srt.13280.
This study aimed to investigate the effect of fat-layer thickness and focal depth on the pressure and temperature distribution of tissue.
Computer simulations were performed for the skin-fat layer models during high-intensity focused ultrasound (HIFU) treatment. The acoustic pressure field was calculated using the nonlinear Westervelt equation and coupled with the Pennes bioheat transfer equation to obtain the temperature distribution. To investigate the effect of the thickness of the fat layer on pressure and thermal distributions, the thickness of the fat layer behind the focal point (z = 13.5 mm) changed from 8 to 24 mm by 2 mm step. The pressure and temperature distribution spectra were extracted.
The simulated results were validated using the experimental results with a 98% correlation coefficient (p < 0.05). There was a significant difference between the pressure amplitude and temperature distribution for the 8-14 mm thickness of the fat layer (p < 0.05). By changing the focal point from 11.5 to 13.5 mm, the maximum acoustic pressure at the focal point increased 66%, and the maximum temperature was 56%, respectively.
Considering the specific treatment plan for each patient, according to the skin and fat layer thicknesses, can help prevent side effects and optimize the treatment process of HIFU.
本研究旨在探讨脂肪层厚度和焦点深度对组织压力和温度分布的影响。
在高强度聚焦超声(HIFU)治疗期间,对皮肤-脂肪层模型进行计算机模拟。使用非线性 Westervelt 方程计算声压场,并与 Pennes 生物传热方程耦合,以获得温度分布。为了研究脂肪层厚度对压力和热分布的影响,改变焦点后(z=13.5mm)脂肪层的厚度,从 8mm 到 24mm,步长为 2mm。提取压力和温度分布谱。
模拟结果与具有 98%相关系数(p<0.05)的实验结果进行了验证。脂肪层厚度为 8-14mm 时,压力幅度和温度分布有显著差异(p<0.05)。通过将焦点从 11.5mm 改变到 13.5mm,焦点处的最大声压增加了 66%,最大温度增加了 56%。
考虑到每个患者的具体治疗计划,根据皮肤和脂肪层的厚度,可以帮助预防副作用并优化 HIFU 的治疗过程。