Department of Orthopaedics, Leiden Universitair Medisch Centrum, Leiden, Netherlands.
Department of Orthopaedics, Spaarne Gasthuis Hoofddorp, Hoofddorp, Netherlands.
Bone Joint J. 2023 Feb;105-B(2):148-157. doi: 10.1302/0301-620X.105B2.BJJ-2022-0414.R1.
The primary aim of this study was to compare the migration of the femoral and tibial components of the cementless rotating platform Attune and Low Contact Stress (LCS) total knee arthroplasty (TKA) designs, two years postoperatively, using radiostereometric analysis (RSA) in order to assess the risk of the development of aseptic loosening. A secondary aim was to compare clinical and patient-reported outcome measures (PROMs) between the designs.
A total of 61 TKAs were analyzed in this randomized clinical RSA trial. RSA examinations were performed one day and three, six, 12, and 24 months postoperatively. The maximal total point motion (MPTM), translations, and rotations of the components were analyzed. PROMs and clinical data were collected preoperatively and at six weeks and three, six, 12, and 24 months postoperatively. Linear mixed effect modelling was used for statistical analyses.
The mean MTPM two years postoperatively (95% confidence interval (CI)) of the Attune femoral component (0.92 mm (0.75 to 1.11)) differed significantly from that of the LCS TKA (1.72 mm (1.47 to 2.00), p < 0.001). The Attune femoral component subsided, tilted (anteroposteriorly), and rotated (internal-external) significantly less. The mean tibial MTPM two years postoperatively did not differ significantly, being 1.11 mm (0.94 to 1.30) and 1.17 mm (0.99 to 1.36, p = 0.447) for the Attune and LCS components, respectively. The rate of migration in the second postoperative year was negligible for the femoral and tibial components of both designs. The mean pain-at-rest (numerical rating scale (NRS)-rest) in the Attune group was significantly less compared with that in the LCS group during the entire follow-up period. At three months postoperatively, the Knee injury and Osteoarthritis Outcome Physical Function Shortform score, the Oxford Knee Score, and the NRS-activity scores were significantly better in the Attune group.
The mean MTPM of the femoral components of the cementless rotating platform Attune was significantly less compared with that of the LCS design. This was reflected mainly in significantly less subsidence, posterior tilting, and internal rotation. The mean tibial MTPMs were not significantly different. During the second postoperative year, the components of both designs stabilized and low risks for the development of aseptic loosening are expected.Cite this article: 2023;105-B(2):148-157.
本研究的主要目的是使用放射立体测量分析(RSA)比较两年后两种非骨水泥旋转平台Attune 和低接触应力(LCS)全膝关节置换(TKA)设计的股骨和胫骨组件的迁移情况,以评估无菌松动的发生风险。次要目的是比较两种设计的临床和患者报告的结果测量(PROMs)。
本随机临床 RSA 试验共分析了 61 例 TKA。在术后第 1 天和第 3、6、12 和 24 个月进行 RSA 检查。分析了组件的最大总点运动(MPTM)、平移和旋转。在术前、术后 6 周和 3、6、12 和 24 个月收集 PROMs 和临床数据。使用线性混合效应模型进行统计分析。
Attune 股骨组件两年后的平均 MPTM(95%置信区间(CI))(0.92 毫米(0.75 至 1.11))与 LCS TKA 显著不同(1.72 毫米(1.47 至 2.00),p<0.001)。Attune 股骨组件明显沉降、倾斜(前后)和旋转(内外)较少。两年后胫骨 MPTM 的平均差异无统计学意义,Attune 和 LCS 组件分别为 1.11 毫米(0.94 至 1.30)和 1.17 毫米(0.99 至 1.36,p=0.447)。两种设计的股骨和胫骨组件在第二年的迁移率均微不足道。Attune 组在整个随访期间的静息疼痛(数字评分量表(NRS)-休息)明显低于 LCS 组。术后 3 个月,Attune 组的膝关节损伤和骨关节炎结果物理功能简化量表、牛津膝关节评分和 NRS-活动评分明显更好。
非骨水泥旋转平台 Attune 的股骨组件的平均 MPTM 明显小于 LCS 设计。这主要反映在明显较少的沉降、后倾和内旋转。胫骨 MPTM 的平均差异无统计学意义。在第二年术后期间,两种设计的组件均稳定,预计发生无菌松动的风险较低。
2023;105-B(2):148-157.