Department of Cariology and Endodontology, Peking University School and Hospital of Stomatology & National Center of Stomatology & National Clinical Research Center for Oral Diseases & National Engineering Laboratory for Digital and Material Technology of Stomatology & Beijing Key Laboratory of Digital Stomatology & Research Center of Engineering and Technology for Computerized Dentistry Ministry of Health & NMPA Key Laboratory for Dental Materials, Beijing 100081, China.
College of Materials Science and Opto-electronic Technology, University of Chinese Academy of Sciences, Beijing 100049, China.
ACS Appl Mater Interfaces. 2023 Feb 15;15(6):7821-7832. doi: 10.1021/acsami.2c20848. Epub 2023 Feb 3.
The regeneration of dental pulp tissue is very important, but difficult, in dentistry. The biocompatibility, water content, and viscoelastic properties of pulp-like tissue must be optimized to achieve the efficient transfer of metabolites and nutrients, a suitable degradation rate, distribution of encapsulated cells, injectability, and gelation under physiological conditions. As promising materials for pulp regeneration, hydrogel scaffolds have been produced to simulate the extracellular matrix and transmit signaling molecules. It is imperative to develop hydrogels to effectively regenerate pulp tissue for clinical application. Here, two injectable double-network (DN) hydrogel-based three-dimensional (3D) cell culture systems were developed for regenerating dental pulp. The microstructure, mechanical property, rheology property, and degradation behavior of the injectable DN glycol chitosan-based hydrogels in a simulated root canal model were characterized and compared to a single-network (SN) glycol chitosan-based hydrogel. Human dental pulp stem cells (hDPSCs) were then encapsulated into the GC-based hydrogels for the regeneration of pulp tissue, and the biological performance was investigated both and . The results showed that the DN hydrogels had ideal injectability under physiological conditions due to the dynamic nature of the crosslinks. Besides, the DN hydrogels exhibited better mechanical properties and longer degradation duration than the corresponding SN hydrogel. As a 3D cell culture system, the characteristics of the DN hydrogel facilitated odontogenic differentiation and mineralization of hDPSCs . Further analysis confirmed that the chemical composition, matrix stiffness, and degradation rate of the DN hydrogel matched those of pulp-like fibrous connective tissue, which might be related to Smad3 activation. These findings demonstrate that DN glycol chitosan-based hydrogels are suitable for the regeneration of pulp tissue.
牙髓组织的再生在牙科领域非常重要,但也极具挑战性。牙髓样组织的生物相容性、含水量和黏弹性必须得到优化,以实现代谢物和营养物质的有效传递、适当的降解速率、包封细胞的分布、可注射性和在生理条件下的凝胶化。水凝胶支架作为牙髓再生的有前途的材料,已被用于模拟细胞外基质并传递信号分子。开发能够有效再生牙髓组织的水凝胶对于临床应用至关重要。在这里,我们开发了两种基于可注射双网络(DN)水凝胶的三维(3D)细胞培养系统,用于再生牙髓。我们对可注射 DN 壳聚糖基水凝胶在模拟根管模型中的微观结构、力学性能、流变性能和降解行为进行了表征,并与单网络(SN)壳聚糖基水凝胶进行了比较。然后,将人牙髓干细胞(hDPSCs)包封到 GC 基水凝胶中,用于牙髓组织的再生,并在体内和体外研究了其生物学性能。结果表明,由于交联的动态性质,DN 水凝胶在生理条件下具有理想的可注射性。此外,DN 水凝胶表现出比相应的 SN 水凝胶更好的机械性能和更长的降解时间。作为 3D 细胞培养系统,DN 水凝胶的特性有利于 hDPSCs 的成牙分化和矿化。进一步的分析证实,DN 水凝胶的化学组成、基质硬度和降解率与牙髓样纤维结缔组织相匹配,这可能与 Smad3 的激活有关。这些发现表明,DN 壳聚糖基水凝胶适合用于牙髓组织的再生。