Suppr超能文献

[锥形束CT分析双颌前突成年患者前牙槽骨在牙齿内收后的形态计量学变化]

[Analysis of morphometric changes in the anterior alveolar bone in bimaxillary protrusion adult patients after retraction with cone-beam CT].

作者信息

Wang Y, Xie P, Shen T, Liu J

机构信息

Department of Orthodontics, The Affiliated Stomatological Hospital of Nanchang University & The Key Laboratory of Oral Biomedicine, Jiangxi Province & Jiangxi Province Clinical Research Center for Oral Diseases, Nanchang 330006, China.

出版信息

Zhonghua Kou Qiang Yi Xue Za Zhi. 2023 Feb 9;58(2):143-150. doi: 10.3760/cma.j.cn112144-20220407-00161.

Abstract

To measure and analyze the morphometric changes in the anterior alveolar bone during treatment and retention stage after retraction in bimaxillary adults using cone-beam CT(CBCT). Fifteen adult patients, four males and 11 females, aged 19 to 28 years[(22.2±3.1) years], who have completed orthodontic treatment and extracted four first premolar teeth for retraction in the Department of Orthodontics, The Affiliated Stomatological Hospital of Nanchang University from January 2016 to December 2018 were selected. CBCT was taken to assess the labial and palatal vertical bone level, total bone thickness at crest area, middle root area and apical area in pre-treatment (T1), post-treatment (T2) and at follow-up (maintained for more than two years) (T3). The differences in alveolar bone morphology at different stages were compared by single factor repeated measure ANOVA, and Pearson correlation analysis was performed on the amount of alveolar bone change in treatment stage and retention stage. There were statistically significant differences in the alveolar bone height of the palatal side of maxillary anterior teeth, the labial side of maxillary lateral incisors and canine among three time points (0.05). The height difference of palatal alveolar bone of anterior teeth in T1-T2 stage was statistically significant (0.05). Palatal alveolar bone of upper and lower central incisors decreased by (1.52±0.32) and (4.96±0.46) mm, respectively. The height difference of anterior palatal alveolar bone was statistically significant in T2-T3 stage(0.05), the palatal alveolar bone height of central incisors increased by (1.20±0.27) and (3.14±0.35) mm respectively. The height difference of palatal alveolar bone in the anterior teeth of T1-T3 stage was statistically significant (0.05), and the height of palatal alveolar bone of central incisors was decreased (0.33±0.11) and (1.82±0.39) mm, respectively. There were statistically significant differences in the thickness of the cervical and middle root alveolar bone of anterior teeth among three time points (0.05). The difference of alveolar bone thickness of the cervical and middle root of anterior teeth at T1-T2 was statistically significant (0.05). decreased by (0.63±0.10) and (0.67±0.09) mm in lateral incisors, respectively. In the T2-T3 stage, the alveolar bone thickness of the crest area of the lower anterior teeth was significantly different (0.05), the alveolar bone thickness of mandibular central incisor crest area increased (0.09±0.03) mm. There were statistically significant differences in alveolar bone thickness in crest area and middle root of the incisors during T1-T3 stage (0.05), among which the middle root decreased by (0.38±0.16) mm and (0.63±0.13) mm, respectively. There was no statistically significant difference in other areas (0.05). The change of alveolar bone height in palatal side of upper anterior teeth at T2-T3 was very strongly negatively correlated with the change in T1-T2. The change of alveolar bone height in labial side of upper anterior teeth and lingual side of lower anterior teeth and the thickness of incisor root and neck were moderately strongly negatively correlated (≤-0.8, <0.001), the change of alveolar bone height in labial side of upper anterior teeth and lingual side of lower anterior teeth and the thickness of incisor crest area were moderately strongly negatively correlated (-0.8<≤-0.4, <0.05). For adult patients after retraction, anterior alveolar bone decreased significantly. In the retention stage, the same degree of bone apposition will occur, but still have alveolar bone loss compared with pre-treatment. The amount of alveolar bone change in the retention stage correlated with the amount of alveolar bone change in the treatment stage.

摘要

使用锥形束CT(CBCT)测量和分析双颌成年患者牙齿内收治疗及保持阶段前牙区牙槽骨的形态学变化。选取2016年1月至2018年12月在南昌大学附属口腔医院正畸科完成正畸治疗并拔除四颗第一前磨牙进行牙齿内收的15例成年患者,年龄19至28岁[(22.2±3.1)岁],其中男性4例,女性11例。于治疗前(T1)、治疗后(T2)及随访(保持两年以上)(T3)拍摄CBCT,评估唇侧及腭侧垂直骨水平、牙槽嵴顶区、牙根中部及根尖区的总骨厚度。采用单因素重复测量方差分析比较不同阶段牙槽骨形态的差异,并对治疗阶段和保持阶段牙槽骨变化量进行Pearson相关分析。上颌前牙腭侧、上颌侧切牙及尖牙唇侧牙槽骨高度在三个时间点间差异有统计学意义(P<0.05)。T1 - T2阶段前牙腭侧牙槽骨高度差异有统计学意义(P<0.05),上颌中切牙和下颌中切牙腭侧牙槽骨分别降低(1.52±0.32)mm和(4.96±0.46)mm。T2 - T3阶段前牙腭侧牙槽骨高度差异有统计学意义(P<0.05),上颌中切牙腭侧牙槽骨高度分别增加(1.20±0.27)mm和(3.14±0.35)mm。T1 - T3阶段前牙腭侧牙槽骨高度差异有统计学意义(P<0.05),上颌中切牙腭侧牙槽骨高度分别降低(0.33±0.11)mm和(1.82±0.39)mm。前牙颈段及牙根中部牙槽骨厚度在三个时间点间差异有统计学意义(P<0.05)。T1 - T2阶段前牙颈段及牙根中部牙槽骨厚度差异有统计学意义(P<0.05),侧切牙分别降低(0.63±0.10)mm和(0.67±0.09)mm。T2 - T3阶段下前牙牙槽嵴顶区牙槽骨厚度差异有统计学意义(P<0.05),下颌中切牙牙槽嵴顶区牙槽骨厚度增加(0.09±0.03)mm。T1 - T3阶段切牙牙槽嵴顶区及牙根中部牙槽骨厚度差异有统计学意义(P<0.05),其中牙根中部分别降低(0.38±0.16)mm和(0.63±0.13)mm。其他区域差异无统计学意义(P>0.05)。上颌前牙腭侧T2 - T3阶段牙槽骨高度变化与T1 - T2阶段变化呈非常强的负相关。上颌前牙唇侧及下颌前牙舌侧牙槽骨高度变化与切牙牙根及颈部厚度呈中度强负相关(r≤ - 0.8,P<0.001),上颌前牙唇侧及下颌前牙舌侧牙槽骨高度变化与切牙牙槽嵴顶区厚度呈中度强负相关( - 0.8<r≤ - 0.4,P<0.05)。对于成年患者牙齿内收后,前牙区牙槽骨明显降低。在保持阶段,会发生同等程度的骨改建,但与治疗前相比仍有牙槽骨吸收。保持阶段牙槽骨变化量与治疗阶段牙槽骨变化量相关。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验