Yasmin Humaira, Giwa Solomon O, Noor Saima, Sharifpur Mohsen
Department of Basic Sciences, Preparatory Year Deanship, King Faisal University, Al-Ahsa 31982, Saudi Arabia.
Department of Mechanical Engineering, Olabisi Onabanjo University, Ago-Iwoye P.M.B. 2002, Nigeria.
Nanomaterials (Basel). 2023 Feb 2;13(3):597. doi: 10.3390/nano13030597.
Advancements in technology related to energy systems, such as heat exchangers, electronics, and batteries, are associated with the generation of high heat fluxes which requires appropriate thermal management. Presently, conventional thermal fluids have found limited application owing to low thermal conductivity (TC). The need for more efficient fluids has become apparent leading to the development of nanofluids as advanced thermal fluids. Nanofluid synthesis by suspending nano-size materials into conventional thermal fluids to improve thermal properties has been extensively studied. TC is a pivotal property to the utilization of nanofluids in various applications as it is strongly related to improved efficiency and thermal performance. Numerous studies have been conducted on the TC of nanofluids using diverse nanoparticles and base fluids. Different values of TC enhancement have been recorded which depend on various factors, such as nanoparticles size, shape and type, base fluid and surfactant type, temperature, etc. This paper attempts to conduct a state-of-the-art review of the TC enhancement of metal oxide nanofluids owing to the wide attention, chemical stability, low density, and oxidation resistance associated with this type of nanofluid. TC and TC enhancements of metal oxide nanofluids are presented and discussed herein. The influence of several parameters (temperature, volume/weight concentration, nano-size, sonication, shape, surfactants, base fluids, alignment, TC measurement techniques, and mixing ratio (for hybrid nanofluid)) on the TC of metal oil nanofluids have been reviewed. This paper serves as a frontier in the review of the effect of alignment, electric field, and green nanofluid on TC. In addition, the mechanisms/physics behind TC enhancement and techniques for TC measurement have been discussed. Results show that the TC enhancement of metal oxide nanofluids is affected by the aforementioned parameters with temperature and nanoparticle concentration contributing the most. TC of these nanofluids is observed to be actively enhanced using electric and magnetic fields with the former requiring more intense studies. The formulation of green nanofluids and base fluids as sustainable and future thermal fluids is recommended.
与能量系统相关的技术进步,如热交换器、电子设备和电池,会产生高热通量,这就需要适当的热管理。目前,传统热流体由于热导率低,应用有限。对更高效流体的需求日益明显,促使纳米流体作为先进热流体得到发展。通过将纳米尺寸材料悬浮在传统热流体中以改善热性能的纳米流体合成已得到广泛研究。热导率是纳米流体在各种应用中利用的关键特性,因为它与提高效率和热性能密切相关。已经使用各种纳米颗粒和基础流体对纳米流体的热导率进行了大量研究。记录了不同的热导率增强值,这取决于各种因素,如纳米颗粒的尺寸、形状和类型、基础流体和表面活性剂类型、温度等。由于这类纳米流体受到广泛关注、具有化学稳定性、低密度和抗氧化性,本文试图对金属氧化物纳米流体的热导率增强进行最新综述。本文介绍并讨论了金属氧化物纳米流体的热导率及其增强情况。综述了几个参数(温度、体积/重量浓度、纳米尺寸、超声处理、形状、表面活性剂、基础流体、排列、热导率测量技术和混合比(对于混合纳米流体))对金属油纳米流体热导率的影响。本文是对齐、电场和绿色纳米流体对热导率影响综述的前沿研究。此外,还讨论了热导率增强背后的机制/物理原理和热导率测量技术。结果表明,金属氧化物纳米流体的热导率增强受上述参数影响,其中温度和纳米颗粒浓度的影响最大。观察到使用电场和磁场可有效提高这些纳米流体的热导率,前者需要更深入的研究。建议将绿色纳米流体和基础流体配制成可持续的未来热流体。